Philips DS3881W User Manual - Page 12
Turn DS3881W on, 4 Connect to your home Wi-Fi network for AirPlay
View all Philips DS3881W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Tip •• After AC power connection, if the built-in battery is full, the power indicator on the front of the unit stays blue; if the built-in battery is not full, the power indicator flashes blue; if the battery is flat, the power indicator turns red. Turn DS3881W on 1 Press on the top to turn the unit on. 2 Wait for successful boot-up of the unit. »» The boot-up takes about 35 seconds. »» During boot-up, the Wi-Fi SETUP indicator on the back of the unit blinks green quickly. »» After boot-up, if no Wi-Fi connection has been set up for DS3881W, the Wi-Fi SETUP indicator starts to blink green slowly. • To turn the unit off, press again. 4 Connect to your home WiFi network for AirPlay To connect DS3881W to your existing home Wi-Fi network, you need to apply your home Wi-Fi setting to DS3881W. You can do this in two ways (depending on which type of Wi-Fi router you use): • Automatically - if your Wi-Fi router is WPS (Wi-Fi Protected Setup)-enabled and supports PBC (Push Button Connection) (see 'Scenario 1: Connect to a WPS router' on page 13) • Manually - if your Wi-Fi router does not support WPS (see 'Scenario 2: Connect to a non-WPS router' on page 13) Once connected successfully, DS3881W will remember your home Wi-Fi settings. Then you can enjoy AirPlay whenever DS3881W is powered on and connected to your home Wi-Fi network automatically. 12 EN