Philips DVD750VR User manual - Page 38

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 38 38 Timer Recording (cont'd) 9 Press o or p to select a recording tape speed. The arrow will appear beside your choice.The selected speed will flash beside REC SPEED. Details about tape speed are on page 76. ONE TIME PROGRAM PROGRAM NUMBER 1 DATE 0 5 / 0 4 SUN START TIME 0 7 : 3 0 P M END TIME 0 8 : 3 0 P M CHANNEL 1 6 REC SPEED S P B SP SLP STANDBY-ON SEARCH MODE DISPLAY REPEAT REPEAT AUDIO A-B SUBTITLE ZOOM ANGLE SKIP / CH RETURN TITLE CLEAR/RESET SLOW DVD SYSTEM MENU VCR/TV VCR DISC/VCR MENU 10 10 Press CLEAR/RESET to store the timer recording. OK STOP PLAY PAUSE 9 11 11 Press TIMER SET. The DVD/VCR will turn off and the red RECORD TIMER light will appear on the front of the DVD/VCR. In some cases, the DVD/VCR will switch to TIMER SET VCR Plus+ RECORD SPEED 1 2 3 DVD mode instead.You may use the DVD Player during a timer recording. If you want to use the VCR until time for the recording, don't press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won't be using the VCR anymore (until after the recording).When the RECORD TIMER light is Helpful Hints on, you cannot put the DVD/VCR in VCR mode by pressing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily.Then, you can use the VCR features again. • If you are recording from other equipment, set CHANNEL to L1 or L2. If you connected the other equipment to the AUDIO and Cancelling Timer Recordings VIDEO In jacks on the front of the DVD/VCR, choose L2. If you con- 1 Press VCR, then press DISC/VCR/MENU. nected the audio and video cables to the AUDIO IN and VIDEO IN jacks on the back of the 2 Press o or p to select TIMER PROGRAMMING, then press B. DVD/VCR, choose L1. • To change incorrect information, press s or B to choose the item 3 Press o or p to find the program you want to cancel. you want to change. Press o or p to adjust the information. • If a timer recording is set and the 4 While the program number is flashing, press s to clear all the information for that program. RECORD TIMER light is on, pressing STOP/EJECT A will turn on the DVD/VCR and/or cancel the ONE TIME PROGRAM timer recording.The RECORD PROGRAM NUMBER 1 DATE 05/04 SUN START TIME 07:30 PM END TIME 08:30 PM CHANNEL 16 REC SPEED SP TIMER light will turn off. Press STOP/EJECTA again to remove the tape. Remember to insert a tape and press TIMER SET to reset the timer recording. • If there is no tape in the VCR when you press TIMER SET, the 5 Press CLEAR/RESET to remove the menu. RECORD TIMER light will flash. Insert a tape.