Philips DVDR3320V User manual - Page 21
Recording Settings, Disc Settings
View all Philips DVDR3320V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Hookup and Settings Recording Settings Disc Record Mode You can set the picture quality for recording; XP (Excellent quality), SP (Standard quality), LP (Low quality), EP (Extend quality). DV Record Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is used. 1. Select the [Disc Record Mode] option then press B. 2. Use v / V to select a desired Disc Record Mode (XP, SP, LP or EP). 3. Press OK to confirm your selection, then press SYSTEM MENU to exit the menu. VCR Record Mode You can set the picture quality for VCR recording; SP (Standard Play), SLP (Super Long Play). Auto Chapter During recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 minutes, 10 minutes or 15 minutes. To turn off automatic chapter marking, select [None]. Record Aspect When DVD recording, you can set the recording aspect ratio to suit the material you're recording (16:9 or 4:3). Disc Settings Initialize If you load a completely blank disc, the [Initialize] menu will appear. Select [Yes] then press OK. The Recorder will initialize the disc. Also, you can reformat the DVD+RW. 1. Select [DISC] > [Initialize] > [Start] and press OK. 2. Select [Yes] and press OK. All contents will be erased and the disc will be formatted. 21