Philips DVDR3435V User manual - Page 90
Video setting
UPC - 609585112032
View all Philips DVDR3435V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
90 Video setting Progressive Scan (Default : OFF) This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to "ON". 1 Press [SETUP]. 2 Using [K / L], select "Playback". Press [OK]. 3 Using [K / L], select "Video". Press [OK]. 2-7 TV/VIDEO VCR DVD OPEN/CLOSE SEARCH AUDIO TITLE RAPID PLAY DISC MENU SETUP OK 1,8 4 Using [K / L], select "Progressive Scan". Press [OK]. 5 Using [K / L], select "ON". Press [OK]. Confirmation window will appear. Video - Progressive Scan DVD Activating progressive scan: Check your TV has progressive scan and connect with component video cable. NOTE: If there is no picture or picture is distorted after selecting "Yes", Wait about 15 seconds for auto recovery. Activate? Yes No 6 Using [{ / B], select "Yes". Press [OK]. 7 Using [K / L], select "Yes" in 15 seconds. Press [OK]. Your setting will be activated. 8 Press [SETUP] to exit. BACK REW PREV PLAY DISPLAY FFW PAUSE NEXT Helpful Hints • If your TV is compatible with Progressive Scan (525p / 480p), you must use the Component Video cable (commercially available) to connect this unit to the TV. (See Method 3 on page 14.) Make sure the "P.SCAN" appears on the front panel display. If not, use the video cable and set the Progressive scan to "OFF" or press and hold [SETUP] for more than 3 seconds during DVD playback, so that the "P.SCAN" on the front panel display disappears. • When selecting "No" or not pressing any keys on the unit or remote control within 15 seconds at step 7, Progressive Scan remains to be "OFF" (interlace scan). Still Mode (Default : Auto) Set the type of still image in pausing playback. Select "Auto" usually. Press [STOP C] if you are playing a disc. 1 Proceed to steps 1 to 3 above. 2-3 TV/VIDEO VCR DVD OPEN/CLOSE SEARCH AUDIO TITLE RAPID PLAY DISC MENU SETUP OK 4 2 Using [K / L], select "Still Mode". Press [OK]. BACK REW PLAY DISPLAY FFW 3 Using [K / L], select a setting. Press [OK]. Your setting will be activated. Auto: Optimum resolution setting (Field of Frame) will be selected. Field: Images in the still mode will be stabilized. Frame: Images in the still mode will be highly defined. 4 Press [SETUP] to exit. PREV PAUSE NEXT Helpful Hint • Frame is 1 completed video image made up of 2 fields (There are 30 frame per second of NTSC video). E9A90UD_EN.indb 90 6/12/2006 4:23:28 PM