Philips HTS3506 User Manual - Page 39

EN 12. SETUPS 12.2. HDMI Video 12.1. TV Display (home) A "Setup" A "Video Setup" A "TV Display" Use this feature to adjust the aspect ratio of the video source which is different from your TV's ratio to fit your TV monitor without distorting the picture. Descriptions of each setting are as follows: Video source Your TV Option 4:3 Normal 4:3 4:3 Crop 16:9 16:9 Widescreen 16:9 16:9 Squeeze 4:3 Description To enjoy 16:9 picture on 4:3 monitor: 16:9 picture is scaled down until both sides of the picture fits the 4:3 TV. To enjoy 16:9 picture on 4:3 monitor: Both sides of the picture are trimmed to fit the 4:3 TV without distorting the aspect ratio of the picture. To enjoy 16:9 picture on 16:9 monitor: Select this setting when you want to enjoy 16:9 picture on the 16:9 TV. To enjoy 4:3 picture on 16:9 monitor: Use this setting to display 4:3 picture on the 16:9 TV without distorting the aspect ratio of the picture. (home) A "Setup" A "Video Setup" A "HDMI Video" Set the resolution of the video signal being output from the HDMI OUT jack. You can select the desired "HDMI Video" among the settings listed below: "Auto", "480p", "720p", "1080i", "1080p", "1080p/24" Actual Output Resolution : Setting in the "HDMI Video" 480i/60 Source 720p/60 1080i/60 720p/24 1080p/24 480p 480p/60 480p/60 480p/60 480p/60 480p/60 720p 720p/60 720p/60 720p/60 720p/60 720p/60 1080i 1080i/60 1080i/60 1080i/60 1080i/60 1080i/60 1080p 1080p/60 1080p/60 1080p/60 1080p/60 1080p/60 1080p/24 1080p/60 1080p/60 1080p/60 1080p/60 1080p/24 Auto The highest resolution supported by your display device will be in effect automatically. • Composite video output (VIDEO OUT) jack can only output 480i/60. • For AVCHD, outputting the video in 24 frames per second (1080p/24) is not available. D Note • The selected resolution must also be supported by your display device. • Even if "HDMI Video" is set to "1080p/24", for a Blu-ray Disc™ that is not recorded in 1080p/24 or for DVD, the video resolution supported by the disc and the display device will be output instead of 1080p/24. • Refer also to your TV's manual. • Pressing [ (play)] on the front panel for 5 seconds changes the setting back to its default. • When connected to an HDCP incompatible display device, the picture will not be displayed properly. • The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit length) may be limited by the device that is connected. • Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). While connected to a device such as a projector, audio will not be output from the HDMI OUT jack. EN - 39