Philips HTS3506 User Manual - Page 43
Wireless, Auto Scan, Manual Entry, Access Point Setting Auto Scan screen will appear.
View all Philips HTS3506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
EN Wireless If you connect this unit to the Wi-Fi network, select "Wireless" and set up necessary settings. Please make a note of your Wi-Fi network name (SSID) and its WEP / WPA key before proceeding with the setup. Auto Scan Search for Wi-Fi networks automatically and select the Wi-Fi network name (SSID) from the list. 1. Follow steps 1 to 2 in "Auto Setup" on page 41. 2. Use [ ] to select "Wireless", then press [OK]. 3. Use [ ] to select "Auto Scan", then press [OK]. • This unit will start searching for Wi-Fi networks automatically. 4. The result of Wi-Fi network searching will be displayed. Use [ ] to select the appropriate Wi-Fi network name (SSID), then press [OK]. • If you select an SSID without " ", please go to step 6. Please select the access point. Rescan Cancel Access 1 Access 2 Access 3 Access 4 Access 5 Access 6 Access 7 5. "Access Point Setting (Auto Scan)" screen will appear. Enter the WEP / WPA key of the selected Wi-Fi network using cursor buttons, number buttons and color key, then press [Red]. • If you do not know the WEP / WPA key for your Wi-Fi network, ask your ISP or the person who set up your Wi-Fi network. Access Point Setting (Auto Scan) Please input the WEP/WPA key with keypad or software keyboard. XXXXXXXXXX_ Done Cancel Clear a/A/@ 6. Use [ ] to select "Continue", then press [OK]. Please confirm the setting. SSID Security WEP/WPA Key ● Access 1 ● WPA-PSK(AES) ● XXXXXXXXXX Continue Rescan Cancel 7. Use [ ] to select "Auto Setup" or "Manual Setup", then press [OK]. • If you select "Auto Setup", follow step 5 in "Auto Setup" on page 41. • If you select "Manual Setup", follow steps 3 to 12 and 14 to 16 in "Manual Setup" on page 41. D Note • The internal wireless LAN supports following specifications. - Wi-Fi standards :IEEE 802.11 b/g/n - Frequency spectrum :2.4 GHz - Security protocol :WEP / WPA / WPA2 Manual Entry Set up the connection to the Wi-Fi network manually by entering the Wi-Fi network name (SSID). 1. Follow steps 1 to 2 in "Auto Scan" on page 43. 2. Use [ [OK]. ] to select "Manual Entry", then press 3. "Access Point Setting (Manual Entry)" screen will appear. Enter the SSID using cursor buttons, number buttons and color key, then press [Red]. 4. Security mode selection screen will appear. Select the security mode of the entered SSID, then press [OK]. • If you select "None", please go to step 6. Please select the security mode. Cancel None WEP WEP-PSK(TKIP) WEP-PSK(AES) WPA-PSK(TKIP) WPA-PSK(AES) 5. "Access Point Setting (Manual Entry)" screen will appear. Enter the WEP / WPA key of the Wi-Fi network using cursor buttons, number buttons and color key, then press [Red]. • If you do not know the WEP / WPA key for your Wi-Fi network, ask your ISP or the person who set up your Wi-Fi network. 6. Use [ ] to select "Continue", then press [OK]. 7. Use [ ] to select "Auto Setup" or "Manual Setup", then press [OK]. • If you select "Auto Setup", follow step 5 in "Auto Setup" on page 41. • If you select "Manual Setup", follow steps 3 to 12 and 14 to 16 in "Manual Setup" on page 41. EN - 43