Philips LC4341 User Guide - Page 14
Installation, Connecting to an external monitor
UPC - 037849911808
View all Philips LC4341 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
7. Installation Connecting to an external monitor Connecting to an external monitor Note: The characters in brackets (a) correspond to characters in fig. 4 of 'Controls and connections'. Caution! Always switch off PC, external monitor and projector before making any connections. 1. Connect the Data out terminal of the computer to the Data in terminal (g) of the projector and secure the plugs by tightening the thumb screws. For this, use the VGA/USB cable (1) supplied. When connecting the projector to a Macintosh computer use the VGA/MAC adaptor (optional). 2. Connect the Data out terminal (f) of the projector to the external monitor and secure the plugs by tightening the thumb screws. For this, use an optional monitor cable. To obtain the audio signal on the monitor instead of on the projector: • Connect the Audio in sockets of the monitor to the Audio out socket (a) of the projector. • Insert the white plug into the L socket and the red plug into the R socket. Some monitors have a single Audio in socket for which a different audio connection cable with a 3.5 mm mini jack is required. Notes: - One external monitor or projector can be connected at a time. - For further details on the operation with On Screen Displays see chapter '8 Operation'. (optional) Monitor cable o in RL Video S-Video DDaatataoiunt (g) DDaattaaoinut Projector (1) Mac/PC (optional) USB DDaattaa oouutt AAuuddiioo oouutt 14