Philips LC4341 User Guide - Page 16

8. Operation Preparation/Display and picture control 2. Use Cursor Control left and/or right to move the cursor to any other item in the menu bar. Display Picture Brightness Contrast Sharpness Hue Saturation Colour temperature Picture format Mirror Audio Settings Tip for Windows users: To adjust size and phase correctly: 1. Select 'Start' and then 'Shut down'. 2. Adjust the projectors size control, so that no vertical bars are visible. 3. Now adjust the projectors phase control for maximum brightness of the projected image. 4. Press 'No' in the Windows shutdown screen to cancel the shutdown action. 3. Select the sub menu item to be adjusted using Cursor Control up and/or Display Picture Audio Settings down. Brightness 4. Adjust the selected item Contrast in the action window at Sharpness Hue the bottom of the screen, Saturation using Cursor Control left and/or right. Colour temperature Picture format Mirror 5. Select the next item to be adjusted in the sub min max menu and adjust as described above. Move pointer left or right to adjust the contrast level. 6. Press Menu to close the On Screen Display. Language selection The projector can display menus in one of six different languages. 1. Press Menu. - The menu bar appears on the screen. 2. Use Cursor Control to select Settings in the menu bar. 3. Use Cursor Control to select Language from the sub menu. 4. Use Cursor Control to select the required language in the action window. 5. If required, select the next item to be adjusted or press Menu to exit. Display and picture control The projector's picture is set to standard specifications at the factory. However, you can adjust the image to suit your own preferences. The projector will store the last used settings for every source. So when you switch from one source to another, the settings of the source switched from will be stored and the settings of the source switched to will be recalled. When the projector is switched off and on again the settings for the selected source will be recalled again. Data only For data signal input, the following adjustments can be made: - Auto image automatically sizes and positions the image to fit optimally in the screen picture; - Horizontal size adjusts the computer image in a horizontal direction to make the image completely fill the screen; - Shift adjusts the computer image in horizontal and vertical direction to centre it on the screen; - Phase when connecting the projector to your PC for the first time, be sure to adjust the phase control for optimal readability of the projected text. Data and Video/S-Video For both data and Video/S-Video signal input, the following adjustments can be made: - Digital Freeze captures a moving picture (still picture); - Digital Zoom enlarges a part of the picture; - Pan selects another section of enlarged picture (in combination with digital zoom); - Keystone Correction corrects picture distortion of the vertical keystone type by internal scaling; - Brightness (b) adjusts brightness of the displayed picture; - Contrast adjusts the overall contrast intensity; - Sharpness controls the contour impression of the picture; - Colour Temperature adjusts the overall picture impression from warm to cool; - Mirror mirrors the picture for use of the projector in various positions with respect to the user(s) and the projection screen (for further explanation see 'Display and picture control' - 'Mirror'). Video/S-Video only For Video/S-Video signal input, the following adjustments can be made: - Hue (only for NTSC) adjusts the tint of the projected image; - Saturation adjusts the colour saturation of the projected image. - Picture Format selects one of three picture format options (4:3, 16:9 or 16:9 enlarged); 16