Philips LC4433 User Guide - Page 6

5. Functional Overview See illustrations Controls On projector (fig. 1) On remote control (fig. 3) 1 Menu To activate and deactivate the menu. 2 Cursor Control To manipulate the mouse cursor on the connected computer as long as the menu is not active. When the menu is active the Cursor Control controls the menu cursor. The cursor control works with up/down and left/right button operation. Note: The Cursor Control can only function as a mouse cursor when the USB socket of the projector is connected to the USB downstream terminal of the computer. 3 A(udio)/V(ideo) Mute To mute the sound of the projector (or an externally connected sound amplifier) and to mute the picture. 4 Standby To switch the projector in or out of the power standby mode. When the projector is in standby mode, the ring around the button lights up red. When the projector is operating, the ring is green. When the projector receives a signal from the remote control the ring is fast blinking green/red. 5 OK To confirm actions in the menu when the menu is on screen. 6 Source To select the current projection source (Data, S-Video or Video). The button toggles between the three signals. 7 Keystone To correct picture distortion of the vertical keystone type by digital scaling. 8 Lamp indicator - Lights up green when the lamp is on. - Lights up orange when lamp life has almost expired. - Lights up red when lamp life has expired. - Fast blinks red when lamp start has failed - Slowly blinks green/red/orange when the lamp is starting up or cooling down. 9 Temperature indicator - Lights up red in case of temperature error. - Flashes in case of fan error. 1 Stand by On To switch the projector in or out the the power standby mode. 2 Mouse Left/Right Function as the Left and Right mouse keys of your PC. 3 - Volume + To adjust the volume. 4 Menu To activate and de-activating the menu. 5 Mute To mute the sound of the projector 6 Source To select the current projection source (Data, S-Video or Video). The button toggles between the three signals. 7 D(igital)-Freeze To capture a moving picture. The button toggles between the Freeze mode and the display situation. 8 D(igital)-Zoom To switch the Digital Zoom function 'On' or 'Off' (toggle button). In 'On' condition, the zoom centre can be selected using Cursor Control and the image is magnified with the zoom factor chosen under Magnification. 9 A(udio)/V(ideo) Mute To mute the sound of the projector (or an externally connected sound amplifier) and to mute the picture. 0 Cursor Control To manipulate the mouse cursor on the connected computer as long as the menu is not active. When the menu is active the Cursor Control controls the menu cursor. The cursor control works with up/down and left/right button operation. Note: The Cursor Control can only function as a mouse cursor when the USB socket of the projector is connected to the USB downstream terminal of the computer. ! OK To confirm actions in the menu when the menu is on screen. 0 Zoomring To adjust the size of the projected image. ! Focus ring To adjust the focus of the projected image. @ Height/Level adjusters To adjust the vertical and/or horizontal angle of the projector. # Lens cap To protect the lens when the projector is not in use. $ IR sensor To receive the signals from the remote control. 6