Philips LFH9160 User Manual - Page 22

accept secure connections, you may use this feature by checking the SFTP radio button. For further information, refer to FTP settings on page 11. For information on setting up the FTP server, refer to chapter Setting up the FTP server on page 10. 6 AUTOMATIC FILE UPLOAD SETTINGS The automatic file upload settings let you configure which dictation files are automatically uploaded to the FTP server when a Digital Pocket Memo is connected to the LAN Docking Station. For further information, refer to Automatic file upload on page 12. 7 ADMINISTRATION PASSWORD Enter an administration password for the LAN Docking Station. 8 COMMENTS You may enter any commentary data about the LAN Docking Station in the comments panel. For further information, see Assigning a comment to the LAN Docking Station on page 15. 9 Press the CONFIGURE button at the bottom of the Initial Setup Installer panel to submit the settings to the LAN Docking Station. 5.7 Changing the settings of multiple LAN Docking Stations The Administration Tool allows for quick reconfiguration of the most important settings of one or multiple LAN Docking Stations. 1 Configure FTP settings, administration password, DHCP activation and automatic file upload settings in the global settings form, which is located below the Administration Tool's main pane. 2 Select the LAN Docking Stations you want to update. 3 Click the SUBMIT CHANGES button in the bottom right corner. An overview of the settings is displayed. These settings will be sent to the LAN Docking Stations after confirmation by clicking the OK button. The result of the operation of each LAN Docking Station is shown in a result window. Clicking the CANCEL button will close the overview, but will keep the new settings stored for later submission. Upon clicking the UNDO CHANGES button, any stored settings will be deleted. D Note Settings can only be uploaded to LAN Docking Stations that are currently online. 5.8 Changing the settings of a single LAN Docking Station Many of the settings of the LAN Docking Station can be changed directly in the data record in the Administration Tool's main pane. These are: • A flag indicates wether the LAN Docking Station is configured via a DHCP server (or not) in the DHCP column. • A flag indicates if the LAN Docking Station connects to an FTP or an SFTP server (for file upload) in the USE SFTP column. 22 User manual