Philips SA3025 User manual - Page 12

3.4 Connect and charge When you connect the player to the PC, it automatically charges. 3.4.1 Use the supplied USB cable 1 Before you use the player for the first time, charge it for at least 5 hours. > The battery* has a 100% charge after 4 hours and an 80% charge after 2 hours. 2 Connect the supplied USB cable to the mini USB port at the bottom of the player, the other end to your PC. > The player will start to charge as soon as it is connected to your PC. Note The player is fully charged when the charging animation stops and is displayed. Your fully charged player will allow up to 12 hours* of music playback. 3.4.2 Battery level indication The approximate power levels of your battery are indicated as follows: Full Two-thirds full Half full Low Empty Note When the batteries are almost empty, the low battery screen blinks. The player saves all settings and unfinished recordings and switches off in less than 60 seconds. * Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. 12