Philips SE4502B User manual - Page 31
Select, Call using Direct Access, Memory, Enter a Dialing Pause, Answer a call, Silent, Handsfree
UPC - 609585145054
View all Philips SE4502B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3 Press o Select. • The call is initiated. 7.1.7 Call using Direct Access Memory Press a number key 3 to 9 for more than 2 seconds to dial a stored direct access memory number. Note • In multihandset packs, each handset has its own direct access memories. • See section 8.6.7 for instructions on how to store, edit, and delete direct access memory numbers. Tip You can mute the ring tone of an incoming call before answering by pressing on c Silent. 7.2.1 Handsfree answering Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. When the phone rings, press l. • The handset loudspeaker is activated. 7.1.8 Enter a Dialing Pause Long press # to enter a pause in the dialling sequence. The pause is indicated by a P. 7.2 Answer a call Danger When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing. When the phone rings, press the t key. • The call is established. Note • Incoming call has priority over other events. Whenever there is an incoming call, other status in progress such as phone setting, menu navigation, etc will be aborted. 7.3 End a call To end a conversation, press h. • The call ends. Tip When auto hang-up is on, you can simply place the handset back to its base station or charger to end the call. This feature is activated by default. Note The call duration (MM:SS) will be displayed on the handset screen for about 5 seconds. Using your phone 29