Philips SE4502B User manual - Page 59

icon is not blinking during charge! • Battery is full: There is no need to charge the battery. • Bad battery contact: Adjust the handset slightly. • Dirty contact: Clean the batteries contact with a cloth moistened with alcohol. Communication is lost during a call! • Charge the battery • Move closer to the base station. Caller does not hear me! Microphone may be muted: During a call, press s. There's no dialling tone! • No power: Check the connections. • Batteries are empty: Charge the batteries. • Move closer to the base station. • Wrong line cable used: Use the line cable provided. • Line adaptor is required: Connect the line adaptor to the line cord. The phone is "Out of range"! • Move closer to the base station. 13.2 Set-up Caller does not hear me clearly! • Move closer to the base station. • Move the base station at least one metre away from any electronic appliances. Searching... is displayed on handset and icon is blinking! • Move closer to the base station. • Make sure that your base station is on. • Reset your unit and restart handset registration. Frequent noise interference on my radio or television! • Move the base station as far away as possible from the electrical appliances. 13.4 Product behavior 13.3 Sound Handset does not ring! Check that the Ring Volume is not set to no bars (Ringer Off), and make sure the icon is not displayed on the screen (see section 9.2.1 - "Set the Ring Volume"). Keypad does not work! • Unlock your keypad: Long press * in idle mode. The handset warms up when making a long call and when it is on the base station! • This is a normal behavior. The handset consumes energy while calling and charging. Frequently asked questions 57