Philips SWW1800/27 User Manual - Page 12

4 Activate the SWW1800 function and set up the link Turn on the power of your HDTV 1 Go to the source menu under the settings menu of your HDTV. 2 Select the HDMI input to which the receiver is connected.. DC 5V Note •• You cannot control the receiver with the supplied remote control and the receiver follows the transmitter's status to enter/exit the standby mode.. •• The synchronization of standby between the HDTV and the receiver depends on the capability of the HDTV. LED indicator status of the receiver Mode Standby (Listen mode) Standby (Sleep mode) Start up in progress On mode Status Higher power consumption rate. Lower power consumption rate. Unrecognized/ unsupported video format Recognized video format Transmission is available with stable signal Power LED indicator Solid purple Solid red Flashing blue Flashing blue Solid blue Tip •• For more information on the Standby (Listen/ Sleep) mode, see the section on "Enter the standby mode". Activate the wireless link Switch on the transmitter Press on the remote control or transmitter in standby mode to turn it on. 12 EN