Philips TAB7908 User manual - Page 22

• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Refer to your TV's user manual for more detailed information. • If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted. Bluetooth A device cannot connect with the soundbar. • The device does not support the compatible profiles required for the soundbar. • You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function. • The device is not correctly connected. Connect the device correctly. • The soundbar is already connected with another Bluetooth device. Disconnect the connected device, and then try again. Quality of audio play from a connected Bluetooth device is poor. • The Bluetooth reception is poor. Move the device closer to the soundbar, or remove any obstacle between the device and the soundbar. I can't find the Bluetooth name of this unit on my Bluetooth device. • Ensure the Bluetooth function is activated on your Bluetooth device. • Re-pair the unit with your Bluetooth device. Dolby Atmos Cannot achieve outstanding Dolby Atmos effects. • For non-HDMI connections (such as use of USB, Bluetooth, Optical or AUDIO IN), limited height surround effects are generated. See the section of 'Dolby Atmos' about how to achieve best Dolby Atmos effects. Remote control does not work • Before you press any playback control button, first select the correct source. • Reduce the distance between the remote control and the unit. • Insert the battery with its polarities (+/-) aligned as indicated. • Replace the battery. • Aim the remote control directly at the sensor on the front of the unit. The subwoofer is idle or the indicator of subwoofer does not light up • Unplug power cord from the mains socket, and plug it in again after 3 minutes to reset the subwoofer. 22 EN