Philips TAB7908 User manual - Page 9

Remote control This section includes an overview of the remote control. 1 (Standby-On) button • Switch the soundbar On or to standby. • Long press for 20 seconds in power on state to enable or disable APD (15 minutes Auto-Standby) 2 (Source) • Press to select an input source for soundbar. • Press and hold to disconnect all devices and enter the Bluetooth pairing mode. 3 (Dolby) Select surround mode (UPMIX, STANDARD, AI). 4 (Mute) Mute or restore volume. 5 Navigation buttons / (Left/Right) • Skip to the previous or next track in USB/BT mode. • Navigate Left/Right in menu structure. / (Up/Down) • Navigate up/down in menu structure. (Center) • Start, pause or resume play in USB/ BT mode. 6 (MENU) Enter setup menu. 7 (Back) Exit menu. 8 +/- (System's volume) Increase / decrease the system's volume. 9 +/- (Subwoofer's Volume) Increase / decrease the subwoofer's volume. 1 2 3 4 5 6 7 8 9 Prepare the remote control • The provided remote control allows the unit to be operated from a distance. • Even if the remote control is operated within the effective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control. • If the remote control is operated near other products which generate infrared rays, or if other remote control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly. EN 9