Philips VOIP4331B User manual - Page 5

Important information, Instructions for use for the VOIP 433, For your safety, Safety information,

Page 5 highlights

Important information US Instructions for use for the VOIP 433 The VOIP 433 is a Windows Live™ Messenger compatible USB / landline phone, capable of voice communication through Internet protocol as well as on a normal landline line. For your safety Safety information This telephone is not designed for making emergency telephone calls when the power fails. An alternative should be made available for access to emergency calls. Power requirements The product requires an electrical supply of 110 - 120 volts, single phase alternating current, excluding IT installations defined in standard UL 60950. Battery requirements The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 750mAh (HR10/44). IF THE INCORRECT TYPE OF BATTERIES IS USED, A WARNING MESSAGE WILL BE DISPLAYED. WARNING : The electrical network is classified as dangerous according to criteria in the standard UL 60950. The only way to power down this product is by unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries; use recommended type supplied with this telephone. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations. Safety precautions > Do not allow the handset to come into contact with liquids or moisture. > Do not open the handset or base station. This could expose you to high voltages. > Do not allow the charging contacts of the charger or the battery to come into contact with extraneous conductive materials. > There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the USB socket during a storm. > Do not use the handset in an explosive hazard area such as where there is gas leaking. > Young children should be supervised to ensure that they do not play with the telephone. > Because the phone works by sending radio signals between the base unit and the handset, wearers of hearing aids may experience interference in the form of a humming noise. > We advise that this phone should not be used near intensive care medical equipment or by persons with pacemakers. > Your phone can interfere with electrical equipment such as answering machines, TV and radio sets if placed too close. It is recommended that you position the base unit at least one meter from such appliances. > Privacy of communications may not be ensured when using this telephone. CAUTION : Use only the mains adapter supplied with this telephone. Incorrect adapter polarity or voltage can seriously damage the unit. Base adapter Charger adapter Input : 120VAC 60 Hz Input : 120VAC 60 Hz Output : 9VDC 300mA Output: 9VDC 150mA 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

5
US
Instructions for use for the VOIP 433
The VOIP 433 is a Windows Liveā„¢ Messenger compatible USB / landline phone, capable of voice
communication through Internet protocol as well as on a normal landline line.
For your safety
Safety information
This telephone is not designed for making emergency telephone calls when the power fails. An alternative
should be made available for access to emergency calls.
Power requirements
The product requires an electrical supply of 110 - 120 volts, single phase alternating current, excluding IT
installations defined in standard UL 60950.
Battery requirements
The handset requires power source of two rechargeable NiMH batteries, size AAA 1.2V 750mAh (HR10/44).
IF THE INCORRECT TYPE OF BATTERIES IS USED, A WARNING MESSAGE WILL BE DISPLAYED.
Safety precautions
>
Do not allow the handset to come into contact with liquids or moisture.
>
Do not open the handset or base station. This could expose you to high voltages.
>
Do not allow the charging contacts of the charger or the battery to come into contact with extraneous
conductive materials.
>
There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended
that users unplug the phone from the USB socket during a storm.
>
Do not use the handset in an explosive hazard area such as where there is gas leaking.
>
Young children should be supervised to ensure that they do not play with the telephone.
>
Because the phone works by sending radio signals between the base unit and the handset, wearers of
hearing aids may experience interference in the form of a humming noise.
>
We advise that this phone should not be used near intensive care medical equipment or by persons with
pacemakers.
>
Your phone can interfere with electrical equipment such as answering machines, TV and radio sets if placed
too close. It is recommended that you position the base unit at least one meter from such appliances.
>
Privacy of communications may not be ensured when using this telephone.
WARNING :
The electrical network is classified as dangerous according to criteria in the standard
UL 60950. The only way to power down this product is by unplugging the power supply from the
electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily
accessible.
CAUTION :
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
Never
use non-rechargeable batteries; use recommended type supplied with this telephone. NiMH batteries
must be disposed of in accordance with the applicable waste disposal regulations.
CAUTION :
Use only the mains adapter supplied with this telephone. Incorrect adapter polarity
or voltage can seriously damage the unit.
Base adapter
Charger adapter
Input : 120VAC 60 Hz
Input : 120VAC 60 Hz
Output :
9VDC 300mA
Output:
9VDC 150mA
Important information