Philips WAS700 User manual - Page 18

English Installation Setting up Wi-Fi connection between Center and Station You can add a station to an existing Wi-Fi network of Center and Station. Up to 5 WAS700 stations can be connected to a WAC700 Center. On Center 1 Switch on WAC700 Center and select HD source 2 To select Add New Station on Center a. Press MENU b. Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu c. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select ➜ You will enter the Installation Mode. Searching for the new station start ➜ Playback stops on the previously associated Station if you are playing the HD source On Station 3 Connect the new station to power supply 4 Select your desired language: English, Français, Español, Nederlands, Italiano and Deutsch ➜ The set enters Installation Mode ➜ The search for Center starts. On Center 5 Press STOP/Ç on the Center when all the stations are found IMPORTANT! - Avoid thick walls. Your Center and Station should never be blocked by 2 or more walls. - Avoid placing the sets close to large metal objects. - Adjust the location of your Center and Station according to the reception status of Wi-Fi signals. - indicates maximum reception - indicates minmum reception - WACS700 do not support range expander devices If there is interference from neighborhood, such as the pause during playback, the sets' slow response to your operation - Keep the Center or Station at least 3 meters away from microwave ovens, DECT phones, bluetooth devices (e.g. headphones, a computer mouse), wireless access points (e.g. routers), cordless phones, Wi-Fi compatible printers and PDAs, etc.. - Use the WEP* key when connecting your Center and Station to an existing wireless PC network. See the manual Connect to your PC - Change the operating channel of your Center and Station when connecting them to an existing wireless PC network.To learn about how to change channels, see the manual Connect to your PC - If possible, change the operating channels of the other Wi-Fi devices at your home. - Turn the above devices in different directions to minimize interference. * stands for Wired Equivalent Privacy. It is a security protocol for wireless local area network Deleting a station 1 Switch on WAC700 Center and select HD source 2 To select Delete Station on Center a. Press MENU. b. Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu c. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select ➜ On the Center 's display shows the list of connected stations 3 Press 3 or 4 and 2 to select the station you wish to delete 4 Press 3 or 4 and 2 to select Yes 18