Philips WAS700 User manual - Page 33
Tuner, Wall mounting - troubleshooting
![]() |
UPC - 037849965429
View all Philips WAS700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
English Troubleshooting x flashes on the sychro display of Center's remote control ✔ Signal error. Check you have pointed the remote control toward the IR area of the set you wish to operate After the set is switched on, nothing appears on the sychro display of Center's remote control ✔ You switched on the set by using the control on the set instead of center's remote control. Press REFRESH on center's remote control to synchronize its display. The remote control does not function properly. ✔ Remove the protective plastic tab before using the Station's remote control. ✔ Reduce the distance between the remote control and the set. ✔ Insert the batteries with their polarities (+/- signs) aligned as indicated. ✔ Replace the batteries. ✔ Point the remote control directly towards the IR sensor. Tuner Radio reception is poor ✔ If the signal is too weak, adjust the antenna or connect an external antenna for better reception. ✔ Increase the distance between the set and your TV or VCR. ✔ Install the supplied FM wire antenna for better reception. ✔ Keep your Center or Station at least 1 meter away from PC. There will be very interference on the radio reception whenever my center or station is near the PC. Such interferece happens to most of the built-in tuner product. Wall mounting How do I mount the Center or Station onto walls? ✔ Use the by-packed wall mounting kits. It is recommended you get a qualified person to fix the mounting brackets safely onto your walls before you mount the Center or Station. For details, refer to the Appendix : How to mount your Station onto Walls 33
![](/manual_guide/products/phillips-was700-user-manual-ff9a4ea/33.png)