Philips WAS700 User manual - Page 30

English Reset Reset If desired, you can restore your Center or Stations to their default setting (including the network setting). 1 Check the set is switched on (See Basic functions, Switching on/to standby and selecting functions, Switching to Eco power/ on) 2 Press MENU to enter the MENU screen 3 Use the navigation controls 3 or 4 and 2 to enter Settings 4 Use the navigation controls 3 or 4 and 2 to enter Restore settings If both Center and Stations are reset: ● Do as you did in the first-time Wi-Fi connection (see Installation, Set up Wi-Fi connection between Center and Station) 7 On Center, press STOPÇto exit Installation Mode when all the Stations are found. 5 Press 3 or 4 and 2 to select Yes ➜ The set is rebooted. Language selection screen appears. 6 Select your desired language: English, French, Spanish, Dutch, Italian and German ➜ The set enters Installation Mode. ➜ The search for Center or Stations starts.The Wi-Fi connection is being re-established. If the Center is reset and Stations are not reset: ● On the Stations, select AUX mode and enter Installation Mode by: a. Press MENU. b. Use the navigation controls 3 or 4 and 2 to select Installation Mode ➜ The Stations start to connect Center If a Station is reset and the Center is not: ● On the Center, select HD mode and then, enter Installation Mode by: a. Press MENU. b. Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu c. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select Add New Station ➜ Searching for Stations starts. 30