Philips WAS700 User manual - Page 28

English FM radio Tuning to radio stations 1 Check the set is switched on or to standby (See Basic functions, Switching on/to standby and selecting functions, Switching to Eco power/ on) 2 Press SOURCE once or more to select Radio (on the remote control, press TUNER/AUX once or more) ➜ Playback screen appears. Display shows: Radio, radio station frequency and If programmed, a preset number. Storing preset radio stations You can store up to 40 preset radio stations in the memory. Autostore: automatic programming Autostore automatically starts programming radio stations from preset 1. Available stations are programmed in the order of radio frequencies: RDS stations followed by FM stations. Maximum 10 RDS stations will be stored (from Preset 1 to Preset 10). ● To select Autostore radio, a. Press MENU. b. Use the navigation controls 3 or 4 and 2 to select ➜ Display shows: Autostore Please wait... ➜ After all stations are stored, the first autostore preset station will then automatically play. 3 Press and hold 3 or 4 until the frequency in the display starts running. ➜ The radio automatically tunes to a station of sufficient reception. Display shows searching during automatic tuning ➜ If a station is received in stereo, is shown. ➜ When you are receiving an RDS station, is shown. 4 Repeat step 3 if necessary until you find the desired radio station. ● To tune to a weak station, press 3 or 4 briefly and repeatedly until optimal reception is found. Manual programming 1 Tune to your desired radio station (see Tuning to radio stations) 2 On the remote control, press Program to store the station. ➜ The station is stored in the 1st vacant preset position. Display shows its preset number. 3 Repeat steps 1-2 to store other stations. Helpful hints: - If you store more than 40 stations, the new station will replace the 1st preset station. To listen to a preset station 1 Press 1 to enter the list of presets 2 Use the navigation controls 3 or 4 and 2 to select the desired station 28