Pioneer 575 Owner's Manual - Page 45
DVD/CD/Video CD player
UPC - 770680057594
View all Pioneer 575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Additional information 10 English Deutsch Français Italiano Nederlands Español Problem Remedy SND.DEMO shows in • Press and hold (stop) on the front panel for about five seconds. The disc tray the display and the unit ejects automatically to indicate the Sound Demo mode is disabled. can't be controlled. DVD/CD/Video CD player Problem Remedy The disc is ejected automatically after loading. • Clean the disc and align the disc properly in the disc guide. • If the region number on a DVD-video disc does not match the number on the player, the disc cannot be used (see DVD Video regions on page 42). In this instance, the following message appears on screen: Incompatible disc region number/Can't play disc. • Allow time for any condensation inside the player to evaporate. Avoid using the player near an air-conditioning unit. Playback not possible. • If the disc is loaded upside down, reload the disc with label side face up. Picture playback stops and buttons cannot be used. • Press (stop), then (play) to start playback again. • Switch the power off once, then on again using the front panel STANDBY/ON button. Settings are canceled. • When the power is cut, settings will be canceled. No picture/No color. • Check that connections are correct and that plugs are inserted fully. • Check the manual of the TV/monitor to make sure the settings are correct. • If the Progressive setting is selected and you have used component video cables to connect a TV that is not compatible with a progressive scan signal, you will not be able to see any picture at all. With your TV connected using either the composite or S-video terminals, change the Component Out setting to Interlace (see Video Output settings on page 30). Screen is stretched or • The TV Screen setting is incorrect. Set the TV Screen option to match the TV/ aspect doesn't change. monitor you're using (see Video Output settings on page 30). When recorded on a VCR or passed through an AV selector, there is disturbance in the playback picture. • This system uses copy-protection technology which may prevent recording or cause picture problems when connected through a VCR or AV selector. This is not a malfunction. Picture disturbance • This player is compatible with Macro-Vision System copy guard. Some discs during playback or dark. include a copy prevention signal, and when this type of disc is played back, stripes etc., may appear on some sections of the picture depending on the TV. This is not a malfunction. • Discs respond differently to particular player functions. This may result in the screen becoming black for a brief instant or shaking slightly when the function is executed. These problems are largely due to differences between discs and disc content and are not malfunctions of this player. Noticeable difference in • DVDs and CDs use different recording methods. This is not a malfunction. DVD and CD volume. 45 En