Pioneer AVH-W4500NEX Owners Manual - Page 103

English Menu Item [Connection Status] [GPS Antenna] [Positioning Status] [Installation] [Speed Pulse] [Illumination] [Back Signal] [iDataLink] Description Check that the leads are properly connected between this product and vehicle. Displays the connection status of the GPS antenna ([OK] or [NOK]) and the reception sensitivity. NOTE If reception is poor, change the installation position of the GPS antenna. Displays the positioning status (3D positioning, 2D positioning, or no positioning), the number of satellites used for positioning (orange), and the number of satellites that have received signals (yellow). If signals from more than three satellites are received, the current location can be measured. Indicates whether the installation position of this product is correct or not. If installed correctly, [OK] appears. When this product is installed at an extreme angle exceeding the limitation of the installing angle, [NOK(Inst. Angle)] is displayed. If the installation of this product is continually changed and it is not firmly fixed into place, [NOK(Vibration)] is displayed. The speed pulse value detected by this product is shown. Displays the status of headlights or small lamps of the vehicle. When the shift lever is shifted to "R" (reverse position), the signal switches to [High] or [Low]. The signal displayed varies depending on the vehicle. Displays the status of the optional iDatalink adapter. [OEM Settings] Menu Item [OEM Settings] Description (page 93). [OEM Volume Settings] Menu Item [OEM Volume Settings] Description (page 93). - 103 -