Pioneer AVH-W4500NEX Owners Manual - Page 112
Video settings
View all Pioneer AVH-W4500NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
English NOTE The measurement time varies depending on the type of vehicle. TIP To stop the measurement, touch [Stop]. 14 Store the microphone carefully in the glove compartment or another safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change, or malfunction. Adjusting the cutoff frequency value You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: [Standard Mode]: Front, Rear, Subwoofer. [Network Mode]: High, Mid, Subwoofer. NOTES • Subwoofer settings are available only when [Subwoofer] is [On]. • Rear speaker settings are available only when [Rear Speaker Output] is [Rear]. 1 Press . 2 Touch then . 3 Touch [Crossover] or [Subwoofer Settings]. 4 Touch or to switch the speaker. 5 Drag the graph line to set the cutoff position. 6 Drag the lowest point of the graph to set the cutoff slope. The following items can also be set. Switches the subwoofer phase between normal and reverse position. LPF/HPF Switches the LPF/HPF setting to [On] or [Off]. When it is turned off, the high-pass filter or low-pass filter of each speaker can also be turned on by touching the graph lines. Video settings The menu items vary according to the source. [DVD/DivX Setup] This setting is available only when [Disc] is selected as the source. - 112 -