Pioneer AVH-X3700BHS Owner's Manual - Page 59

Appendix The icon  is displayed, and operation is impossible.  The operation is not compatible with the video configuration. - This operation is not possible. (For example, the DVD playing does not feature that angle, audio system, subtitle language, etc.) The picture stops (pauses) and this product cannot be operated.  The reading of data is impossible during disc playback. - Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio.  The aspect setting is incorrect for the display. - Select the appropriate setting for that image. A parental lock message is displayed and DVD playback is not possible.  The parental lock is on. - Turn the parental lock off or change the level. The parental lock for DVD playback cannot be canceled.  The code number is incorrect. - Input the correct code number. Playback is not with the audio language and subtitle language settings selected in "DVD/DivX Setup".  The DVD playing does not feature dialog or subtitles in the language selected in "DVD/DivX Setup". - Switching to a selected language is not possible if the language selected in "DVD/DivX Setup" is not recorded on the disc. The picture is extremely unclear/distorted and dark during playback.  The disc features a signal to prohibit copying. (Some discs may have this.) - Since this product is compatible with the copy guard analog copy protect system, the picture may suffer from horizontal stripes or other imperfections when a disc with that kind of protection signal is viewed on some displays. This is not a malfunction. iPod cannot be operated.  The iPod is frozen. - Reconnect the iPod with the USB interface cable for iPod / iPhone. - Update the iPod software version.  An error has occurred. - Reconnect the iPod with the USB interface cable for iPod / iPhone. - Park your vehicle in a safe place, and turn off the engine. Turn the ignition key back to off (ACC OFF). Then restart the engine, and turn the power to this product back on. - Update the iPod software version.  Cables are not connected correctly. - Connect the cables correctly. Sound from the iPod cannot be heard.  The audio output direction may switch automatically when the Bluetooth and USB connections are used at the same time. - Use the iPod to change the audio output direction. Problems with the phone screen Dialing is impossible because the touch panel keys for dialing are inactive.  Your phone is out of range for service. - Retry after re-entering the range for service.  The connection between the cellular phone and this product cannot be established now. - Perform the connection process. Problems with the Application screen A black screen is displayed.  While operating an application, the application was ended on the smartphone side. - Press to display the Top menu screen.  The smartphone OS may be awaiting screen operation. - Stop the vehicle in a safe place and check the screen on the smartphone. The screen is displayed, but operation does not work at all.  An error has occurred. - Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again. - When an Android device is connected, disconnect the Bluetooth connection from this product and then reconnect it. The smartphone was not charged.  Charging stopped because the temperature of the smart- phone rose due to prolonged use of the smartphone during charging. - Disconnect the smartphone from the cable, and wait until the smartphone cools down.  More battery power was consumed than was gained from charging. - This problem may be resolved by stopping any unneces- sary services on the smartphone. Error messages When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center. Common AMP Error  This product fails to operate or the speaker connection is incorrect; the protective circuit is activated. - Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance. Product overheat. System will be shut down automatically in 1 minute. Restart the product by ACC Off/On may fix this problem. If this message keep showing up, it is possible that some problem occurred in the product.  The temperature is too high for this product to operate. - Follow the instructions displayed on the screen. If this does not solve the problem, contact your dealer or an authorized Pioneer Station for assistance. Pandora Error-19  Communication failed. - Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. Skip limit reached.  Skip limit reached. - Do not exceed the skip limit. - Due to music licensing restrictions, Pandora limits the total number of skips per hour. 59