Pioneer AVH-X3700BHS Owner's Manual - Page 6
V OUT - owners manual
View all Pioneer AVH-X3700BHS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Precaution ● In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed. If you attempt to watch video image while driving, the warning "Viewing of front seat video source while driving is strictly prohibited." will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake. When using a display connected to V OUT The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images. WARNING NEVER install the rear display in a location that enables the driver to watch video images while driving. To avoid battery exhaustion Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery. WARNING Do not install this product in a vehicle that does not have an ACC wire or circuitry available. Rear view camera With an optional rear view camera, you are able to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. WARNING ● SCREEN IMAGE MAY APPEAR REVERSED. ● USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes. 6 Handling the USB connector CAUTION ● To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. ● Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product. Failure to operate After-sales service for Pioneer products Please contact the dealer or distributor from which you purchased the product for after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below. Please do not ship your product to the companies at the addresses listed below for repair without making advance contact. ● U.S.A Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404 ● CANADA Pioneer Electronics of Canada, Inc. CUSTOMER SATISFACTION DEPARTMENT 340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada 1-877-283-5901 905-479-4411 For warranty information, please see the Limited Warranty sheet included with your product. Visit our website Visit us at the following site: http://www.pioneerelectronics.com http://www.pioneerelectronics.ca 1 Register your product. 2 Receive updates on the latest products and technologies. 3 Download owner's manuals, order product catalogs, research new products, and much more. 4 Receive notices of software upgrades and software updates. Protecting the LCD panel and screen ● Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures. ● When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc. ● To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently. Notes on internal memory Before removing the vehicle battery ● Some of the settings and recorded contents will not be reset. Data subject to erasure The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself). ● Some of the settings and recorded contents will not be reset. Resetting the microprocessor CAUTION Pressing the RESET button resets settings and recorded contents to the factory settings. ● Do not perform this operation when a device is connected to this product. ● Some of the settings and recorded contents will not be reset. The microprocessor must be reset under the following conditions: ● Prior to using this product for the first time after installation. ● If this product fails to operate properly. ● If there appears to be problems with the operation of the system. ● If your vehicle position is shown on the map with a signifi- cant positioning error. 1 Turn the ignition switch OFF.