Pioneer AVIC-D1 Installation Manual - Page 17

Chapter 1 How to Use Navigation Unit and Names of the Parts Inserting the DVD Map Disc 1 Press and hold OPEN/CLOSE button. The LCD panel fully opens, and the DVD-ROM loading slot appears. DVD-ROM loading slot DVD-ROM EJECT button Ejecting the DVD Map Disc 1 Press and hold OPEN/CLOSE button. The LCD panel fully opens. 2 Press DVD-ROM EJECT button. The DVD Map Disc is ejected. 3 Press OPEN/CLOSE button. The LCD panel closes. Adjusting the LCD Panel Angle ❒ To close the LCD panel, press OPEN/ CLOSE button again. 2 Insert the DVD Map Disc into the DVD- ROM loading slot. If you insert the DVD Map Disc, the LCD panel closes automatically, and then format reading will start. ❒ Make sure the DVD-ROM loading slot is empty before inserting a DVD Map Disc. ❒ Inserting the DVD Map Disc reboot DVD navigation mode. ❒ Do not insert anything other than a disc into the DVD-ROM loading slot. ❒ If you cannot insert a disc completely or if a inserted disc is not recognized, check that the label side of the disc is up. Press DVD-ROM EJECT button to eject the disc, and check the disc for damage before inserting the disc again. • Do not open and close the LCD panel with hands by force. This may cause malfunction. • When opening, closing and adjusting the angle of the LCD panel, be careful not to get your finger caught. The LCD panel will be closed automatically with the turning of the ignition switch. • Press ANGLE button to adjust the LCD panel to an easily viewable angle. You can adjust the angle of the LCD panel every time you press the ANGLE button. The LCD panel angle continues changing as long as you press ANGLE button and hold. ❒ When you press the ANGLE button with the maximum angle, the LCD panel closes all the way. ❒ The adjusted angle of the LCD panel will be memorized and the LCD panel will automatically return to this angle the next time the turning of the ignition switch (ACC) on. 15