Pioneer AVIC-D1 Other Manual - Page 23

DIN Rear-mount Installation using the screw holes on the side of this product 1. Remove the side brackets. 3. Attach the frame if applicable. When attaching the frame, attach it with the grooved side pointing downwards. Attach the frame with this part facing downwards. English Español Deutsch Français Screw for fixing the side bracket (5 × 6 mm) 2. Fastening this product to the factory radio-mounting bracket. Position this product so that the brackets screw holes and its screw holes are aligned (are fitted), and tighten the screws at 3 or 4 locations on each side. Use either the binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of the bracket's screw holes. Factory radio mounting bracket If the pawl gets in the way, bend it down Binding screw or flush surface screw Be sure to use the screws supplied with this product. Dashboard or console 22 Italiano Nederlands