Pioneer AVIC-Z2 Installation Manual - Page 16

Turning the Source Off • Press the AV button and hold until the source turns off. ❒ This navigation system also can be switched off by turning the ACC (ignition) OFF. Inserting/Ejecting a Disc Inserting a disc 1 Press the OPEN CLOSE button. The LCD panel opens, and the disc loading slot appears. Disc loading slot EJECT button How to Use the Navigation System and Names of the Parts Chapter 2 • When opening, closing and adjusting the angle of the LCD panel, be careful not to get your finger caught. • Do not use with the LCD panel left open. If LCD panel is left open, it may result in injury in the event of an accident. ❒ To close the LCD panel, press the OPEN CLOSE button again. When a disc is already set • Do not open and close the LCD panel with hands by force. This may cause malfunction. • Do not operate this navigation system until the LCD panel completely opens or closes. If this navigation system is operated while the LCD panel is opening or closing, the LCD panel may stop at that angle for safety. • Do not place a glass or a can on this navigation system when the LCD panel is open. Doing so may break this navigation system. The above screen is displayed. Make sure the disc loading slot is empty before inserting a disc into the slot. 2 Insert a disc into the disc loading slot. ➲ For details, refer to "Handling and Care of the Disc" in the end of this manual and "Detail information for playable media" in the Operation Manual. If you insert a disc, the LCD panel closes automatically, and then format reading will start. ❒ When the ignition switch is turned off (ACC OFF) with the LCD panel open, the LCD panel remains open. Always make sure to close the LCD panel before turning the ignition switch off. ❒ Do not insert anything other than a disc into the disc loading slot. 14