Pioneer AVIC-Z2 Installation Manual - Page 17

Ejecting a disc, Adjusting the LCD Panel Angle - manuals

Page 17 highlights

Chapter 2 How to Use the Navigation System and Names of the Parts ❒ The built-in DVD drive plays one, standard, 12cm or 8-cm (single) disc at a time. Do not use an adapter when playing 8-cm discs. ❒ If you cannot insert a disc completely or if an inserted disc is not recognized, check that the label side of the disc is up. Press the EJECT button to eject the disc, and check the disc for damage before inserting the disc again. ❒ If the built-in DVD drive does not operate properly, an error message may be displayed. ➲ Error messages ➞ Operation Manual 3 Touch [Back]. ❒ The adjusted angle of the LCD panel will be memorized and the LCD panel will automatically return to that angle the next time the LCD panel is opened or closed. Ejecting a disc 1 Press the OPEN CLOSE button. The LCD panel opens. 2 Press the EJECT button. The disc is ejected. 3 Press the OPEN CLOSE button. The LCD panel closes. Adjusting the LCD Panel Angle • When opening, closing and adjusting the angle of the LCD panel, be careful not to get your finger caught. • Do not open and close the LCD panel with hands by force. This may cause malfunction. 1 Press and hold the OPEN CLOSE button. The angle adjustment screen appears. 2 Touch [+] or [-] to adjust the angle. Five levels of angle are available. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

15
Chapter 2
How to Use the Navigation System and Names of the Parts
The built-in DVD drive plays one, standard, 12-
cm or 8-cm (single) disc at a time. Do not use
an adapter when playing 8-cm discs.
If you cannot insert a disc completely or if an
inserted disc is not recognized, check that the
label side of the disc is up. Press the
EJECT
button to eject the disc, and check the disc for
damage before inserting the disc again.
If the built-in DVD drive does not operate prop-
erly, an error message may be displayed.
Error messages
Operation Manual
Ejecting a disc
1
Press the OPEN CLOSE button.
The LCD panel opens.
2
Press the EJECT button.
The disc is ejected.
3
Press the OPEN CLOSE button.
The LCD panel closes.
Adjusting the LCD Panel Angle
When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
1
Press and hold the OPEN CLOSE button.
The angle adjustment screen appears.
2
Touch [+] or [–] to adjust the angle.
Five levels of angle are available.
3
Touch [Back].
The adjusted angle of the LCD panel will be
memorized and the LCD panel will auto-
matically return to that angle the next time
the LCD panel is opened or closed.