Pioneer BDP 320 Owner's Manual - Page 23

• The output video resolution depends on the video output terminal below.  To output film material To output 1080/24p film material from HDMI OUT 03 Example: Video resolution of the terminal, set the output video resolution to either Auto or currently playing disc Source Direct. Output Video Resolution  Auto  Source : 1080/60i Current Output : 1080/60i Output video resolution from the player • The output video resolution setting can also be switched by selecting Output Video Resolution from the TOOLS menu.  About Film material The film material is a video signal with a frame rate of 24 frames/second. For example, these materials include 1080/24p, 720/24p, etc. Caution • 1080/24p signals can only be output from the HDMI OUT terminal. They cannot be output from other video terminals. • When Auto is selected, the picture is output at 60 frames/second if your TV is not compatible with 1080/ 24p signals. • When Source Direct is selected, the signals are output as such, even if your TV is not compatible with 1080/24p signals. If the picture is not displayed properly, use OUTPUT RESOLUTION to set an output video resolution at which the video and audio signals are properly output. • Even if Auto or Source Direct is selected, 720/24p video signals are output at 60 frames/second.  About the output video resolution The output video resolution setting and the resolution of the picture that is actually output differ for the different terminals. See the table below. Output video resolution setting HDMI1 HDMI OUT terminal COMPONENT VIDEO/ VIDEO output terminals COMPONENT/VIDEO1 HDMI OUT terminal COMPONENT VIDEO output terminals2 VIDEO output terminal2 Auto3 Resolution preferred by No video signals are No video signals are - - TV4,5,6 output output 480i 480/60i 480/60i 480/60i 480p 480/60p 480/60p 1080i 1080/60i 1080/60i7,8 1080p3 1080/60p9,10 - - Source Direct Resolution recorded on disc5,11,12 Resolution recorded on 480/60i disc8,11,12,13 1. The video output terminal set at Video in the Setup Navigator (page 19) or the video output terminal selected with VIDEO SELECT (page 22). 2. Depending on the BD, the pictures may not be output. 3. This cannot be selected when the video output terminal is set to COMPONENT/VIDEO. 4. The pictures are output with the preferred output resolution of the device (TV, AV receiver or amplifier, etc.) connected to HDMI OUT terminal. 5. For details on the output of film material (1080/24p or 720/24p video signals), see To output film material above. 6. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i even if the TV's recommended resolution is 1080/60p. 7. DVD-Video or DVD-R/-RW (VR format) may be output at 480/60p. 8. BD-ROM or BD-R/-RE may be output at 480/60p. 9. Depending on the connected HDMI cable, the video signals may not be output. 10. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i. 11. Depending on the connected TV, the video signals may not be output. 12. 720/24p film material is output at 720/60p. 13. 1080/24p film material is output at 1080/60i. 23 En