Pioneer DEH-P840MP Owner's Manual - Page 25

MP3/WMA Player Section 05 English Español • There is sometimes a delay between starting up playback and the sound being issued. This is particularly the case when playing back multi-session and many folders. When being read in, Format Read is displayed. • If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting the disc again. • Playback is carried out in order of file number. Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.) • When playing back files recorded as VBR (Variable Bit Rate) files, the play time will not be correctly displayed if fast-forward or reverse operations are used. • If inserted disc contains no files that can be played back, No Audio is displayed. • There is no sound on fast-forward or reverse. • If the built-in CD player does not operate prop- erly, an error message such as ERROR-11 may be displayed. Refer to Understanding built-in CD player error messages on page 55. Introduction of advanced built-in CD player (MP3/WMA) operation 1 1 FUNCTION display Shows the function status. 1 Press OPEN to open the front panel. 2 Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: PMODE (repeat play)-RDM (random play)- SCAN (scan play)-PAUSE (pause) • To return to the playback display, press BAND. Note • If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Deutsch Français Italiano Nederlands En 25