Pioneer DEH-P840MP Owner's Manual - Page 37

Audio Adjustments Section 07 English Español Deutsch Introduction of audio adjustments 1 23 1 AUDIO display Shows the audio adjustments status. 2 PRESET EQ indicator Shows which equalizer preset is presently selected. 3 ASL indicator Shows the level of ASL. 1 Press OPEN to open the front panel. 2 Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: Fad (balance adjustment)-EQ (equalizer curve adjustment)-Bass (bass)-Treble (treble)- Loud (loudness)-Sub-W1 (subwoofer1)/Non Fad (non fading output on/off)-Sub-W2 (subwoofer2)/Non Fad (non fading output setting)-HPF (high pass filter)-SLA (source level adjustment)-ASL (automatic sound levelizer) • When the subwoofer controller setting is only S.W Control:EXT, you cannot switch Sub-W1. (Refer to page 46.) • You can select Sub-W2 only when Subwoofer output is switched on in Sub-W1. • When the subwoofer controller setting is only S.W Control:EXT, you can switch the non fading output on/off mode. (Refer to page 46.) • You can select the non fading output setting mode only when non fading output is switched on in the non fading output on/off mode. • When selecting the FM tuner as the source, you cannot switch to SLA. • To return to the playback display, press BAND. Note • If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Français Italiano Nederlands En 37