Pioneer DEH-P840MP Owner's Manual - Page 44
Initial Settings
View all Pioneer DEH-P840MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Section 08 Initial Settings Adjusting initial settings 1 Initial settings lets you perform initial set up of different settings for this unit. 1 FUNCTION display Shows the function status. 1 Press SOURCE and hold until the unit turns off. 2 Press OPEN to open the front panel. 3 Press FUNCTION and hold until CLOCK appears in the display. 4 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: CLOCK-WARN-D OPEN-AUX-DIM- BRIGHT-SW-TEL-DISP Use the following instructions to operate each particular setting. • To cancel initial settings, press BAND. • You can also cancel initial settings by holding down FUNCTION until the unit turns off. Setting the time This is used to set the time on the unit's clock display. 1 Press OPEN to open the front panel. 2 Press FUNCTION to select CLOCK. Press FUNCTION until the time appears in the display. 3 Select the portion of the time display you wish to set with 2/3. Pressing 2/3 will select a portion of the clock display: HOUR-MINUTE As you select portions of the clock display the portion selected will blink. 4 Select the correct time with 5/∞. Pressing 5 will increase the selected hour or minute. Pressing ∞ will decrease the selected hour or minute. 44 En