Pioneer DEH-P840MP Owner's Manual - Page 55

Additional Information Section 10 English Español Deutsch Français Understanding built-in CD player error messages When problems occur during CD play an error message may appear on the display. If an error message appears on the display refer to the table below to see what the problem is and the suggested method of correcting the problem. If the error cannot be corrected, contact your dealer or your nearest Pioneer Service Center. Message Cause ERROR-11, 12, Dirty disc 17, 30 Action Clean disc. ERROR-11, 12, Scratched disc Replace disc. 17, 30 ERROR-22, 23 ERROR-10, 11, 12, 17, 30, 50, A0 The CD format cannot be played back Electrical or mechanical ERROR-44 All tracks are skip tracks Replace disc. Turn the ignition ON and OFF, or switch to a different source, then back to the CD player. Replace disc. About folders and MP3 files • An outline of a CD-ROM with MP3 files on it is shown below. Subfolders are shown as folders in the folder currently selected. First Second Third level level level Notes • The equipment assigns folder numbers. The user can not assign folder numbers. • When playing discs with MP3 files and audio data (CD-DA) such as CD-EXTRA and MIXEDMODE CD, both types can be played only by switching mode between MP3 and CD-DA with BAND. • It is not possible to check folders that do not include MP3 files. (These folders will be skipped without displaying the folder number.) • MP3 files in up to 8 tiers of folders can be played back. However, there is a delay in the start of playback on discs with numerous tiers. For this reason we recommend creating discs with no more than 2 tiers. • It is possible to play back up to 253 folders on one disc. En 55 Italiano Nederlands