Pioneer DEH-P840MP Owner's Manual - Page 38
Setting the sound focus, equalizer, Using balance adjustment, Using the equalizer
View all Pioneer DEH-P840MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Section 07 Audio Adjustments Setting the sound focus equalizer Clarifying the sound image of vocals and instruments allows the simple staging of a natural, pleasant sound environment. Even greater listening enjoyment will be obtained if seating positions are chosen carefully. • FRT1 boosts the treble on the front output and the bass on the rear output. FRT2 boosts the treble and the bass on the front output and the bass on the rear output. (The bass boost is the same for both front and rear.) For both FRT1 and FRT2 the H setting provides a more pronounced effect than the L setting. 1 Press EQ and hold until SFEQ OFF appears in the display. 2 Press EQ to select the desired SFEQ mode. FRT1-H (front1-high) -FRT1-L (front1-low) - FRT2-H (front2-high) -FRT2-L (front2-low) - CUSTOM (custom) -SFEQ OFF (off) 3 Press 2 or 3 to select the desired position. LEFT (left) -CENTER (center) -RIGHT (right) Notes • If you adjust the bass or treble, CUSTOM memorizes an SFEQ mode in which the bass and treble are adjusted for personal preference. • If you switch the SFEQ mode, the H.P.F. function is automatically switched off. By switching the H.P.F. function on after selecting the SFEQ mode, you can combine H.P.F. function with SFEQ function. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press OPEN to open the front panel. 2 Press AUDIO to select Fad. Press AUDIO until Fad appears in the display. • If the balance setting has been previously adjusted, Bal will be displayed. 3 Press 5 or ∞ to adjust front/rear speaker balance. Each press of 5 or ∞ moves the front/rear speaker balance towards the front or the rear. • Fad F 15 - Fad R 15 is displayed as the front/rear speaker balance moves from front to rear. • Fad F/R 0 is the proper setting when only two speakers are used. • When the rear output setting is Rear SP:S.W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 46. 4 Press 2 or 3 to adjust left/right speaker balance. When you press 2 or 3, Bal L/R 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right. • Bal L 9 - Bal R 9 is displayed as the left/right speaker balance moves from left to right. Using the equalizer The graphic equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired. 38 En