Home » Pioneer Manuals » Automotive Audio & Video » Pioneer DEH-P8500MP » Manual Viewer

Pioneer DEH-P8500MP Operation Manual - Page 36

Audio Adjustments, Adjusting bass, Adjusting treble, Adjusting loudness

View all Pioneer DEH-P8500MP manuals

Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Section Audio Adjustments C 2N-IN-1W-2W Note If you make adjustments when a curve other than CUSTOM2 is selected, CUSTOM1 curve Is up dated.® Adjusting bass You can adjust the cut-off frequency and the bass level, • If SFEQ has been set to FRT1, bass adjust ment affects only the rear output: front out put cannot be adjusted. 1 Press OPEN to open the front panel. 2 Press AUDIO to select Bass. Press AUDIO until Bass appears In the dis play. 3 Press ◄ or ► to select the desired fre quency. Press ◄ or ► until the desired frequency ap pears in the display. 40-63-100-160 (Hz) 4 Press A or T to adjust the bass level. Each press of A or T increases or decreases the bass level. +6 --6 is displayed as the level is increased or decreased.® Adjusting treble You can adjust the cut-off frequency and the treble level. • If SFEQ has been set to FRT1 or FRT2, tre ble adjustment affects only the front out put: rear output cannot be adjusted. 1 Press OPEN to open the front panel. 2 Press AU DIO to select Treble. Press AUDIO until Treble appears in the dis play. 3 Press ◄ or ► to select the desired fre quency. Press ◄ or ► until the desired frequency ap pears in the display. 2.5k-4k-6.3k-10k (Hz) 4 Press A or T to adjust the treble level. Each press of A or T increases or decreases the treble level. +6 --6 is displayed as the level is increased or decreased.® Adjusting loudness Loudness compensates for deficiencies In the low- and high-sound ranges at low volume. 1 Press OPEN to open the front panel. 2 Press AUDIO to select Loud. Press AUDIO until Loud appears in the dis play. 3 Press A to turn loudness on. Loudness level (e.g., Loud Mid) appears in the display. 4 Press -4 or P- to select a desired level. Each press of ◄ or ► selects level in the fol lowing order: Low (low)-Mid (mid)-Fligh (high) 5 Press T to turn loudness off. Loud OFF appears in the display.® En

Section	Page
Operation Manual Mode d’emploi	1
Before You Start	2
0 What’s What	2
0 Power ON/OFF	2
To establish a safe level:	4
Decibel	4
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE	4
Notes	7
((( XAA »)	7
Notes	7
• Press RESET on the head unit with a pen tip or other pointed instrument.	7
1 Press OPEN to open the front panel.	9
2 Slide and remove the front panel toward you.	9
3 Put the front panel into the protective case provided for safe keeping.	9
1 Make sure the inner cover is closed.	9
2 Replace the front panel by clipping it into place.	9
J C	11
m	11
(D EQ button	11
(D SOURCE button	11
© PAUSE button	11
® CLOCK button	11
® OPEN button	11
@ A/T/^/^ buttons	11
® BAND button	11
® 1-6 buttons	11
® VOLUME	11
dJ ENTERTAINMENT button	12
® AUDIO button	12
® FUNCTION button	12
® DISPLAY button	12
^ VOLUME button	13
^ CD button	13
D PAUSE button	13
^ TUNER button	13
^ ATT button	13
• Press SOURCE to turn the unit on.	14
• When using the head unit, press SOURCE to select a source.	14
• Press SOURCE and hold until the unit turns off.®	14
• When using the remote control, press TUNER or CD to select a source.	14
Notes	14
® Stereo (ST) indicator	15
® LOG indicator	15
(3) Band indicator	15
® Preset number indicator	15
(5) Frequency indicator	15
1 Press SOURCE to select the tuner.	15
2 Use VOLUME to adjust the sound level.	15
3 Press BAND to select a band.	15
4 To perform manual tuning, press ◄ or ^ with quick presses.	15
5 To perform seek tuning, press and hold	15
© Function display	16
1 Press OPEN to open the front panel.	16
2 Press FUNCTION to display the function names.	16
1 Press OPEN to open the front panel.	16
2 Press FUNCTION to select Local.	16
3 Press A to turn local seek tuning on.	16
4 Press ◄ or ► to set the sensitivity.	16
1 Press OPEN to open the front panel.	17
2 Press FUNCTION to select BSM.	17
3 Press A to turn BSM on.	17
Note	17
® Track number indicator	18
® Play time indicator	18
1 Press EJECT.	18
2 Insert a CD into the CD loading slot.	18
3 Use VOLUME to adjust the sound level.	18
4 To perform fast forward or reverse, press and hold ◄ or ►.	18
5 To skip back or forward to another track, press ◄ or ►.	18
4 Press T to turn repeat play off. ? :	19
® Function display	19
1 Press OPEN to open the front panel.	19
2 Press FUNCTION to display the function names.	19
1 Press OPEN to open the front panel.	19
2 Press FUNCTION to select Repeat.	19
3 Press A to turn repeat play on.	19
1 Press OPEN to open the front panel.	19
1 Press OPEN to open the front panel.	19
7 Move the cursor to the last position by pressing >■ after entering the title.	21
8 Press BAND to return to the playback display.	21
Notes	21
1 Press OPEN to open the front panel.	21
2 Press DISPLAY.	21
1 Press OPEN to open the front panel.	21
2 Press DISPLAY.	21
1 Press OPEN to open the front panel.	21
2 Press DISPLAY and hold until the title begins to scroll to the left.	21
® MP3/WMA indicator	22
® Folder number indicator	22
@ Play time indicator	22
(4) Track number indicator	22
1 Press EJECT.	22
2 Insert a CD-ROM into the CD loading slot.	22
3 Use VOLUME to adjust the sound level.	22
4 Press A or T to select a folder.	22
5 To perform fast forward or reverse, press and hold < or	22
6 To skip back or forward to another track, press ◄ or ►.	22
1 Press OPEN to open the front panel.	23
2 Press FUNCTION to select Repeat.	23
3 Press -4 or P- to select the repeat range.	24
Notes	24
1 Select the repeat range.	24
2 Press OPEN to open the front panel.	24
1 Select the repeat range.	24
2 Press OPEN to open the front panel.	24
3 Press FUNCTION to select Scan.	24
4 Press ▲ to turn scan play on.	24
5 When you find the desired track (or folder) press T to turn scan play off.	24
Note	24
1 Press OPEN to open the front panel.	24
2 Press FUNCTION to select Pause.	25
3 Press ▲ to turn pause on.	25
4 Press T to turn pause off.	25
1 Press OPEN to open the front panel.	25
2 Press DISPLAY.	25
1 Press OPEN to open the front panel.	25
2 Press DISPLAY and hold until the text information begins to scroll to the left.	25
© Disc number indicator	26
® Play time indicator	26
@ Track number indicator	26
1 Press SOURCE to select the multi-CD player.	26
2 Use VOLUME to adjust the sound level.	26
3 Select a disc you want to listen to with the 1-6 buttons.	26
4 To perform fast forward or reverse, press and hold ◄ or ►.	26
5 To skip back or forward to another track, press ◄ or ►.	26
© Function display	27
1 Press OPEN to open the front panel.	27
2 Press FUNCTION to display the function names.	27
1 Press OPEN to open the front panel.	27
2 Press FUNCTION to select Repeat.	27
3 Press ◄ or ► to select the repeat range.	27
Notes	27
1 Select the repeat range.	27
2 Press OPEN to open the front panel.	27
1 Select the repeat range.	28
2 Press OPEN to open the front panel.	28
3 Press FUNCTION to select Scan.	28
4 Press ▲ to turn scan play on.	28
5 When you find the desired track (or disc) press T to turn scan play off.	28
1 Press OPEN to open the front panel.	28
2 Press FUNCTION to select Pause.	28
3 Press ▲ to turn pause on.	28
4 Press T to turn pause off.	28
1 Play a CD that you want to program.	28
2 Press OPEN to open the front panel.	28
8 Press BAND to return to the playback display.	31
Notes	31
1 Press OPEN to open the front panel.	31
2 Press DISPLAY.	31
1 Press OPEN to open the front panel.	31
3 Press -4 or ► to scroll through the list of titles that have been entered.	31
4 Press A to play your favorite CD title.	31
1 Press OPEN to open the front panel.	31
2 Press DISPLAY.	31
1 Press OPEN to open the front panel.	32
2 Press DISPLAY and hold until the title begins to scroll to the left.	32
3 Press A or T to select your favorite setting.	32
1 Press OPEN to open the front panel.	32
2 Press FUNCTION to select Comp.	32
(D Audio display	33
(D Preset equalizer indicator	33
d) ASL indicator	33
1 Press OPEN to open the front panel.	33
2 Press AUDIO to display the audio function names.	33
Note	33
1 Press EQ and hold until SFEQ appears in the display.	33
2 Press EQ to select the desired SFEQ setting.	33
3 Press -4 or to select the desired position.	34
1 Press OPEN to open the front panel.	34
2 Press AUDIO to select Fad.	34
3 Press A or T to adjust front/rear speaker balance.	34
4 Press -4 or P- to adjust left/right speaker balance.	34
(M)	34
2N—IN—1W—2W	36
Note	36
1 Press OPEN to open the front panel.	36
2 Press AUDIO to select Bass.	36
3 Press ◄ or ► to select the desired frequency.	36
40—63—100—160 (Hz)	36
4 Press A or T to adjust the bass level.	36
1 Press OPEN to open the front panel.	36
2 Press AU DIO to select Treble.	36
3 Press ◄ or ► to select the desired frequency.	36
2.5k—4k—6.3k—10k (Hz)	36
4 Press A or T to adjust the treble level.	36
1 Press OPEN to open the front panel.	36
2 Press AUDIO to select Loud.	36
3 Press A to turn loudness on.	36
4 Press -4 or P- to select a desired level.	36
5 Press T to turn loudness off.	36
1 Press OPEN to open the front panel.	37
4 Press A or T to adjust the output level of the subwoofer.	37
2 Press AUDIO to select Sub-WI.	37
4 Press -4 or P- to select the phase of subwoofer output.	37
1 Press OPEN to open the front panel.	37
2 Press AUDIO to select non fading output on/off setting.	37
1 Press OPEN to open the front panei.	37
2 Press AUDIO to select Sub-W2.	37
3 Press ◄ or ► to select cut-off frequency.	37
1 Press OPEN to open the front panel.	37
2 Press AUDIO to select non fading output setting.	37
3 Press A or T to adjust the output level of the non fading.	38
1 Press OPEN to open the front panel.	38
2 Press AUDIO to select HPF.	38
3 Press A to turn high pass filter on.	38
4 Press ◄ or ► to select cut-off frequency.	38
50—80—125 (Hz)	38
Note	38
1 Compare the FM tuner volume level with the level of the source you wish to adjust.	38
2 Press OPEN to open the front panel.	38
3 Press AUDIO to select SLA.	38
4 Press A or T to adjust the source volume.	38
Notes	38
(M)	38
1 Press OPEN to open the front panel.	39
2 Press AU DIO to select ASL.	39
3 Press A to turn ASL on.	39
4 Press -4 or ► to select the desired ASL level.	39
© Function display	40
1 Press SOURCE and hold until the unit turns off.	40
2 Press OPEN to open the front panel.	40
3 Press FUNCTION and hold until the clock appears in the display.	40
4 Press FUNCTION to select one of the initial settings.	40
1 Press OPEN to open the front panel.	40
2 Press FUNCTION to select clock.	40
3 Press ◄ or ► to select the segment of the clock display you wish to set.	40
4 Press A or T to set the clock.	40
1 Press OPEN to open the front panel.	40
2 Press FUNCTION to select Warning.	40
3 Press A or ▼ to turn Warning on or off.	40
1 Press OPEN to open the front panel.	41
3 Press A or T to turn Flap Auto on or off.	41
1 Press OPEN to open the front panel.	41
2 Press FUNCTION to select AUX.	41
3 Press A or T to turn AUX on or off.	41
AUX:ON) a	41
1 Press OPEN to open the front panel.	41
2 Press FUNCTION to select Dimmer.	41
3 Press A or T to turn Dimmer on or off.	41
1 Press OPEN to open the front panel.	41
3 Press ◄ or ► to adjust the brightness ievel.	41
1 Press OPEN to open the front panel.	42
2 Press FUNCTION to select Rear SP.	42
3 Press A or T to switch the rear output setting.	42
4 Press ◄ or ► to switch the subwoofer output or non fading output.	42
Notes	42
1 Press OPEN to open the front panel.	42
3 Press -4 or ► to switch the telephone muting/attenuation.	42
1 Press OPEN to open the front panel.	42
2 Press FUNCTION to select Motion.	42
3 Press A or T to turn Motion on or off.	43
• Press CLOCK to turn the clock display on or off.	44
Notes	44
• Press SOURCE to select AUX as the source.	44
1 Press OPEN to open the front panel.	44
2 Press ENTERTAINMENT.	44
1 Press OPEN to open the front panel.	44
3 Press 1 numbered button to select the desired character type.	44
4 Press A or T to select a letter of the alphabet.	44
5 Press ► to move the cursor to the next character position.	45
6 Move the cursor to the last position by pressing ► after entering the title.	45
7 Press BAND to return to the playback display. 0	45
® EXTR indicator	45
@ TEXT indicator	45
@ A (NNC) indicator	45
(4) W (THR) indicator	45
(D News indicator	45
i) Traffic indicator	46
1 Press OPEN to open the front panel.	46
2 Press DISPLAY.	46
Note	46
Notes	46
1 Press OPEN to open the front panel.	46
2 Press FUNCTION to select program type selection (PTY).	46
3 Press -4 or P- to select a program type.	46
4 Press A to begin the search.	46
Notes	46
1 Press PAUSE and hold to display dynamic label.	47
2 Press ◄ or ► to recall the three most recent dynamic label.	47
3 Press ▼ to scroll the dynamic label.	47
1 Display the dynamic label you want to store in memory.	47
2 Press any of 1-6 and hold to store the selected dynamic label.	47
d) XM channel number indicator	48
® XM band indicator	48
• Press CLOCK and hold to select the desired channel select setting.	48
(M)	52
AM tuner	54
Note	54
PIONEER CORPORATION	55
Reverse mode	56
Feature DEMO	56
Motion DEMO	56
Notes	56
Modo de retroceso	56
Demostración de características	56
Demostración de película	56
Notas	56
<KSNNX/01K00001>	56
DEH-P8500MP	57
Note:	58
Note:	61
1. Remove the frame. (Fig. 9)	62
2. Fastening the unit to the factory radio mounting bracket.	62
(Fig. 10) (Fig. 11)	62

Match case Limit results 1 per page

Section

Audio Adjustments

2N—IN—1W—2W

Note

If you make adjustments when a curve other than

CUSTOM2

is selected,

CUSTOM1

curve Is up-

dated.®

Adjusting bass

You can adjust the cut±off frequency and the

bass level,

• If SFEQ has been set to

FRT1,

bass adjust-

ment affects only the rear output: front out-

put cannot be adjusted.

Press OPEN to open the front panel.

Press AUDIO to select Bass.

Press

AUDIO

until

Bass

appears In the dis-

play.

Press ◄ or ► to select the desired fre-

quency.

Press ◄ or ► until the desired frequency ap-

pears in the display.

40—63—100—160

(Hz)

Press

to adjust the bass level.

Each press of

increases or decreases

the bass level. +

6--6

is displayed as the level

is increased or decreased.®

Adjusting treble

You can adjust the cut±off frequency and the

treble level.

• If SFEQ has been set to

FRT1

FRT2,

tre-

ble adjustment affects only the front out-

put: rear output cannot be adjusted.

Press OPEN to open the front panel.

Press AU DIO to select Treble.

Press

AUDIO

until

Treble

appears in the dis-

play.

Press ◄ or ► to select the desired fre-

quency.

Press ◄ or ► until the desired frequency ap-

pears in the display.

2.5k—4k—6.3k—10k

(Hz)

Press

to adjust the treble level.

Each press of

increases or decreases

the treble level.

±±6

is displayed as the

level is increased or decreased.®

Adjusting loudness

Loudness compensates for deficiencies In the

low± and high±sound ranges at low volume.

Press OPEN to open the front panel.

Press AUDIO to select Loud.

Press

AUDIO

until

Loud

appears in the dis-

play.

Press

to turn loudness on.

Loudness level (e.g.,

Loud Mid)

appears in the

display.

Press

-4

P-

to select a desired level.

Each press of ◄ or ► selects level in the fol-

lowing order:

Low

(low)—

Mid

(mid)—

Fligh

(high)

Press

to turn loudness off.

Loud OFF

appears in the display.®