Pioneer DEH-P8500MP Operation Manual - Page 42
Initial Settings, Switching the telephone, muting/attenuation, Switching the motion screen
View all Pioneer DEH-P8500MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Section №1 ( Initial Settings Initially, the unit is setter rear full-range speak er connection (RearSP:FULL). When rear out put are connected to full range speakers (when Rear SP:FULL is selected), you can con nect the RCA subwoofer output to a subwoo fer. In this case, you can select whether to use the subwoofer controller's (low pass filter, phase) built-in S.W ControhINT or the auxili ary S.W Control:EXT. 1 Press OPEN to open the front panel. 2 Press FUNCTION to select Rear SP. Press FUNCTION repeatedly until Rear SP ap pears in the display. 3 Press A or T to switch the rear output setting. Pressing A or T will switch between Rear SP:FULL (full-range speaker) and Rear SP:S.W (subwoofer) and that status will be displayed. ■ When no subwoofer is connected to the rear output, select Rear SP :FULL. ■ When a subwoofer is connected to the rear output, set for subwoofer Rear SP :S.W. ■ When the rear output setting is RearSP:S.W, you cannot change the subwoofer controiier. 4 Press ◄ or ► to switch the subwoofer output or non fading output. Pressing ◄ or ► will switch between S.W ControhINT and S.W ControhEXT and that status will be displayed. Notes Even if you change this setting, there is no output unless you turn the non fading output (refer to Using non fading output on page 37) or subwoofer output (refer to Using subwoofer output on page 37) in the audio menu on. If you change the subwoofer controller, sub woofer output and non fading output in the audio menu return to the factory settings. Both rear speaker leads output and RCA rear output are switched simultaneously in this setting.tZ) Switching the telephone muting/attenuation Sound from this system is muted or attenu ated automatically when a call is made or re ceived using a cellular telephone connected to this unit. • The sound is turned off, MUTE or ATT is displayed and no audio adjustment is pos sible. • Operation returns to normal when the phone connection is ended. 1 Press OPEN to open the front panel. 2 Press FUNCTION to select Telephone. Press FUNCTION repeatedly until Telephone appears in the display. 3 Press -4 or ► to switch the telephone muting/attenuation. Pressing ◄ or ► will switch between Telephone :ATT (attenuation) and Telephone :MUTE (muting) and that status will be displayed. (E Switching the motion screen You can turn on or off the moving source icon display. When off is selected, the moving source icon disappears after opening screen is displayed. 1 Press OPEN to open the front panel. 2 Press FUNCTION to select Motion. Press FUNCTION repeatedly until Motion ap pears in the display. En