Pioneer DEH-P8500MP Operation Manual - Page 62

DIN Rear-mount, iLbout the fixing screws for the front panel - installation

Get Pioneer DEH-P8500MP PDF manuals and user guides View all Pioneer DEH-P8500MP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Installation DIN Rear-mount Installation using the screw holes on the side of the unit 1. Remove the frame. (Fig. 9) Frame Insert the release pin into the hole in the bottom of the frame and pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards and attach it.) 2. Fastening the unit to the factory radio mounting bracket. (Fig. 10) (Fig. 11) Select a position where the screw holes of the bracket and the screw holes of the head unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either binding screws ( 5 x 6 mm) or flush surface screws ( 5 x 6 mm), depending on the shape of the screw holes in the bracket. Fig. 9 iLbout the fixing screws for the front panel If you do not operate the removing and attaching the front panel function, use the supplied fixing screws and fix the front panel to this unit. Fixing screw Fig. 12 Fig. 10 Factory radio mounting bracket Fig.11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
Installation
DIN Rear-mount
Installation using the screw holes on the side of the unit
1.
Remove the frame. (Fig. 9)
Frame
Insert the release pin into the hole in
the bottom of the frame and pull out
to remove the frame.
(When reattaching the frame, point
the side with a groove downwards
and attach it.)
Fig. 9
2.
Fastening the unit to the factory radio mounting bracket.
(Fig. 10) (Fig. 11)
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fitted),
and tighten the screws at 2 places on each side. Use either
binding screws ( 5 x 6 mm) or flush surface screws
( 5 x 6 mm), depending on the shape of the screw holes in
the bracket.
Fig. 10
Factory radio mounting bracket
Fig.11
<ENGLISH>
iLbout the fixing screws for the front panel
If you do not operate the removing and attaching the front panel function, use the supplied
fixing screws and fix the front panel to this unit.
Fixing screw
Fig. 12