Home » Pioneer Manuals » Automotive Audio & Video » Pioneer DEH-P8500MP » Manual Viewer

Pioneer DEH-P8500MP Operation Manual - Page 38

Press AUDIO to select HPF.

View all Pioneer DEH-P8500MP manuals

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Section T (Audio Adjustments ^ C 3 Press A or T to adjust the output level of the non fading. Each press of A or T increases or decreases the level of the non fading. +6 --6 is displayed as the level is increased or decreased. 0 Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn the HPF (high pass tilter) on. Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Press OPEN to open the front panel. 2 Press AUDIO to select HPF. Press AUDIO until HPF appears in the display. 3 Press A to turn high pass filter on. HPF 80 Hz appears in the display. High pass filter is now on. ■ To turn high pass filter off, press T. 4 Press ◄ or ► to select cut-off frequency. Each press of ◄ or ► selects cut-off frequen cies in the following order: 50-80-125 (Hz) Only frequencies higher than those in the se lected range are output from the front or rear speakers. Note If you switch the SFEO setting, the HPF function is automatically turned off. By turning the HPF function on after selecting the SFEO setting, you can combine HPF function with SFEO function. 0 Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra dical changes in volume when switching be tween sources. • Settings are based on the volume level of the FM tuner, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to ad just. 2 Press OPEN to open the front panel. 3 Press AUDIO to select SLA. Press AUDIO until SLA appears in the display. 4 Press A or T to adjust the source vo lume. Each press of A or T increases or decreases the source volume. SLA +4- SLA-4 is displayed as the source vo lume is increased or decreased. Notes Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner. The AM tuner volume level can also be ad justed with source level adjustments. The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. 0 (M) En

Section	Page
Operation Manual Mode d’emploi	1
Before You Start	2
0 What’s What	2
0 Power ON/OFF	2
To establish a safe level:	4
Decibel	4
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE	4
Notes	7
((( XAA »)	7
Notes	7
• Press RESET on the head unit with a pen tip or other pointed instrument.	7
1 Press OPEN to open the front panel.	9
2 Slide and remove the front panel toward you.	9
3 Put the front panel into the protective case provided for safe keeping.	9
1 Make sure the inner cover is closed.	9
2 Replace the front panel by clipping it into place.	9
J C	11
m	11
(D EQ button	11
(D SOURCE button	11
© PAUSE button	11
® CLOCK button	11
® OPEN button	11
@ A/T/^/^ buttons	11
® BAND button	11
® 1-6 buttons	11
® VOLUME	11
dJ ENTERTAINMENT button	12
® AUDIO button	12
® FUNCTION button	12
® DISPLAY button	12
^ VOLUME button	13
^ CD button	13
D PAUSE button	13
^ TUNER button	13
^ ATT button	13
• Press SOURCE to turn the unit on.	14
• When using the head unit, press SOURCE to select a source.	14
• Press SOURCE and hold until the unit turns off.®	14
• When using the remote control, press TUNER or CD to select a source.	14
Notes	14
® Stereo (ST) indicator	15
® LOG indicator	15
(3) Band indicator	15
® Preset number indicator	15
(5) Frequency indicator	15
1 Press SOURCE to select the tuner.	15
2 Use VOLUME to adjust the sound level.	15
3 Press BAND to select a band.	15
4 To perform manual tuning, press ◄ or ^ with quick presses.	15
5 To perform seek tuning, press and hold	15
© Function display	16
1 Press OPEN to open the front panel.	16
2 Press FUNCTION to display the function names.	16
1 Press OPEN to open the front panel.	16
2 Press FUNCTION to select Local.	16
3 Press A to turn local seek tuning on.	16
4 Press ◄ or ► to set the sensitivity.	16
1 Press OPEN to open the front panel.	17
2 Press FUNCTION to select BSM.	17
3 Press A to turn BSM on.	17
Note	17
® Track number indicator	18
® Play time indicator	18
1 Press EJECT.	18
2 Insert a CD into the CD loading slot.	18
3 Use VOLUME to adjust the sound level.	18
4 To perform fast forward or reverse, press and hold ◄ or ►.	18
5 To skip back or forward to another track, press ◄ or ►.	18
4 Press T to turn repeat play off. ? :	19
® Function display	19
1 Press OPEN to open the front panel.	19
2 Press FUNCTION to display the function names.	19
1 Press OPEN to open the front panel.	19
2 Press FUNCTION to select Repeat.	19
3 Press A to turn repeat play on.	19
1 Press OPEN to open the front panel.	19
1 Press OPEN to open the front panel.	19
7 Move the cursor to the last position by pressing >■ after entering the title.	21
8 Press BAND to return to the playback display.	21
Notes	21
1 Press OPEN to open the front panel.	21
2 Press DISPLAY.	21
1 Press OPEN to open the front panel.	21
2 Press DISPLAY.	21
1 Press OPEN to open the front panel.	21
2 Press DISPLAY and hold until the title begins to scroll to the left.	21
® MP3/WMA indicator	22
® Folder number indicator	22
@ Play time indicator	22
(4) Track number indicator	22
1 Press EJECT.	22
2 Insert a CD-ROM into the CD loading slot.	22
3 Use VOLUME to adjust the sound level.	22
4 Press A or T to select a folder.	22
5 To perform fast forward or reverse, press and hold < or	22
6 To skip back or forward to another track, press ◄ or ►.	22
1 Press OPEN to open the front panel.	23
2 Press FUNCTION to select Repeat.	23
3 Press -4 or P- to select the repeat range.	24
Notes	24
1 Select the repeat range.	24
2 Press OPEN to open the front panel.	24
1 Select the repeat range.	24
2 Press OPEN to open the front panel.	24
3 Press FUNCTION to select Scan.	24
4 Press ▲ to turn scan play on.	24
5 When you find the desired track (or folder) press T to turn scan play off.	24
Note	24
1 Press OPEN to open the front panel.	24
2 Press FUNCTION to select Pause.	25
3 Press ▲ to turn pause on.	25
4 Press T to turn pause off.	25
1 Press OPEN to open the front panel.	25
2 Press DISPLAY.	25
1 Press OPEN to open the front panel.	25
2 Press DISPLAY and hold until the text information begins to scroll to the left.	25
© Disc number indicator	26
® Play time indicator	26
@ Track number indicator	26
1 Press SOURCE to select the multi-CD player.	26
2 Use VOLUME to adjust the sound level.	26
3 Select a disc you want to listen to with the 1-6 buttons.	26
4 To perform fast forward or reverse, press and hold ◄ or ►.	26
5 To skip back or forward to another track, press ◄ or ►.	26
© Function display	27
1 Press OPEN to open the front panel.	27
2 Press FUNCTION to display the function names.	27
1 Press OPEN to open the front panel.	27
2 Press FUNCTION to select Repeat.	27
3 Press ◄ or ► to select the repeat range.	27
Notes	27
1 Select the repeat range.	27
2 Press OPEN to open the front panel.	27
1 Select the repeat range.	28
2 Press OPEN to open the front panel.	28
3 Press FUNCTION to select Scan.	28
4 Press ▲ to turn scan play on.	28
5 When you find the desired track (or disc) press T to turn scan play off.	28
1 Press OPEN to open the front panel.	28
2 Press FUNCTION to select Pause.	28
3 Press ▲ to turn pause on.	28
4 Press T to turn pause off.	28
1 Play a CD that you want to program.	28
2 Press OPEN to open the front panel.	28
8 Press BAND to return to the playback display.	31
Notes	31
1 Press OPEN to open the front panel.	31
2 Press DISPLAY.	31
1 Press OPEN to open the front panel.	31
3 Press -4 or ► to scroll through the list of titles that have been entered.	31
4 Press A to play your favorite CD title.	31
1 Press OPEN to open the front panel.	31
2 Press DISPLAY.	31
1 Press OPEN to open the front panel.	32
2 Press DISPLAY and hold until the title begins to scroll to the left.	32
3 Press A or T to select your favorite setting.	32
1 Press OPEN to open the front panel.	32
2 Press FUNCTION to select Comp.	32
(D Audio display	33
(D Preset equalizer indicator	33
d) ASL indicator	33
1 Press OPEN to open the front panel.	33
2 Press AUDIO to display the audio function names.	33
Note	33
1 Press EQ and hold until SFEQ appears in the display.	33
2 Press EQ to select the desired SFEQ setting.	33
3 Press -4 or to select the desired position.	34
1 Press OPEN to open the front panel.	34
2 Press AUDIO to select Fad.	34
3 Press A or T to adjust front/rear speaker balance.	34
4 Press -4 or P- to adjust left/right speaker balance.	34
(M)	34
2N—IN—1W—2W	36
Note	36
1 Press OPEN to open the front panel.	36
2 Press AUDIO to select Bass.	36
3 Press ◄ or ► to select the desired frequency.	36
40—63—100—160 (Hz)	36
4 Press A or T to adjust the bass level.	36
1 Press OPEN to open the front panel.	36
2 Press AU DIO to select Treble.	36
3 Press ◄ or ► to select the desired frequency.	36
2.5k—4k—6.3k—10k (Hz)	36
4 Press A or T to adjust the treble level.	36
1 Press OPEN to open the front panel.	36
2 Press AUDIO to select Loud.	36
3 Press A to turn loudness on.	36
4 Press -4 or P- to select a desired level.	36
5 Press T to turn loudness off.	36
1 Press OPEN to open the front panel.	37
4 Press A or T to adjust the output level of the subwoofer.	37
2 Press AUDIO to select Sub-WI.	37
4 Press -4 or P- to select the phase of subwoofer output.	37
1 Press OPEN to open the front panel.	37
2 Press AUDIO to select non fading output on/off setting.	37
1 Press OPEN to open the front panei.	37
2 Press AUDIO to select Sub-W2.	37
3 Press ◄ or ► to select cut-off frequency.	37
1 Press OPEN to open the front panel.	37
2 Press AUDIO to select non fading output setting.	37
3 Press A or T to adjust the output level of the non fading.	38
1 Press OPEN to open the front panel.	38
2 Press AUDIO to select HPF.	38
3 Press A to turn high pass filter on.	38
4 Press ◄ or ► to select cut-off frequency.	38
50—80—125 (Hz)	38
Note	38
1 Compare the FM tuner volume level with the level of the source you wish to adjust.	38
2 Press OPEN to open the front panel.	38
3 Press AUDIO to select SLA.	38
4 Press A or T to adjust the source volume.	38
Notes	38
(M)	38
1 Press OPEN to open the front panel.	39
2 Press AU DIO to select ASL.	39
3 Press A to turn ASL on.	39
4 Press -4 or ► to select the desired ASL level.	39
© Function display	40
1 Press SOURCE and hold until the unit turns off.	40
2 Press OPEN to open the front panel.	40
3 Press FUNCTION and hold until the clock appears in the display.	40
4 Press FUNCTION to select one of the initial settings.	40
1 Press OPEN to open the front panel.	40
2 Press FUNCTION to select clock.	40
3 Press ◄ or ► to select the segment of the clock display you wish to set.	40
4 Press A or T to set the clock.	40
1 Press OPEN to open the front panel.	40
2 Press FUNCTION to select Warning.	40
3 Press A or ▼ to turn Warning on or off.	40
1 Press OPEN to open the front panel.	41
3 Press A or T to turn Flap Auto on or off.	41
1 Press OPEN to open the front panel.	41
2 Press FUNCTION to select AUX.	41
3 Press A or T to turn AUX on or off.	41
AUX:ON) a	41
1 Press OPEN to open the front panel.	41
2 Press FUNCTION to select Dimmer.	41
3 Press A or T to turn Dimmer on or off.	41
1 Press OPEN to open the front panel.	41
3 Press ◄ or ► to adjust the brightness ievel.	41
1 Press OPEN to open the front panel.	42
2 Press FUNCTION to select Rear SP.	42
3 Press A or T to switch the rear output setting.	42
4 Press ◄ or ► to switch the subwoofer output or non fading output.	42
Notes	42
1 Press OPEN to open the front panel.	42
3 Press -4 or ► to switch the telephone muting/attenuation.	42
1 Press OPEN to open the front panel.	42
2 Press FUNCTION to select Motion.	42
3 Press A or T to turn Motion on or off.	43
• Press CLOCK to turn the clock display on or off.	44
Notes	44
• Press SOURCE to select AUX as the source.	44
1 Press OPEN to open the front panel.	44
2 Press ENTERTAINMENT.	44
1 Press OPEN to open the front panel.	44
3 Press 1 numbered button to select the desired character type.	44
4 Press A or T to select a letter of the alphabet.	44
5 Press ► to move the cursor to the next character position.	45
6 Move the cursor to the last position by pressing ► after entering the title.	45
7 Press BAND to return to the playback display. 0	45
® EXTR indicator	45
@ TEXT indicator	45
@ A (NNC) indicator	45
(4) W (THR) indicator	45
(D News indicator	45
i) Traffic indicator	46
1 Press OPEN to open the front panel.	46
2 Press DISPLAY.	46
Note	46
Notes	46
1 Press OPEN to open the front panel.	46
2 Press FUNCTION to select program type selection (PTY).	46
3 Press -4 or P- to select a program type.	46
4 Press A to begin the search.	46
Notes	46
1 Press PAUSE and hold to display dynamic label.	47
2 Press ◄ or ► to recall the three most recent dynamic label.	47
3 Press ▼ to scroll the dynamic label.	47
1 Display the dynamic label you want to store in memory.	47
2 Press any of 1-6 and hold to store the selected dynamic label.	47
d) XM channel number indicator	48
® XM band indicator	48
• Press CLOCK and hold to select the desired channel select setting.	48
(M)	52
AM tuner	54
Note	54
PIONEER CORPORATION	55
Reverse mode	56
Feature DEMO	56
Motion DEMO	56
Notes	56
Modo de retroceso	56
Demostración de características	56
Demostración de película	56
Notas	56
<KSNNX/01K00001>	56
DEH-P8500MP	57
Note:	58
Note:	61
1. Remove the frame. (Fig. 9)	62
2. Fastening the unit to the factory radio mounting bracket.	62
(Fig. 10) (Fig. 11)	62

Match case Limit results 1 per page

Section

(Audio Adjustments

Press

to adjust the output level

of the non fading.

Each press of

increases or decreases

the level of the non fading. +

6--6

is displayed

as the level is increased or decreased.

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn the HPF

(high pass tilter) on. Only frequencies higher

than those in the selected range are output

from the front or rear speakers.

Press OPEN to open the front panel.

Press AUDIO to select HPF.

Press

AUDIO

until

HPF

appears in the display.

Press

to turn high pass filter on.

HPF 80 Hz

appears in the display. High pass

filter is now on.

■ To turn high pass filter off, press T.

Press ◄ or ► to select cut-off frequency.

Each press of ◄ or ► selects cut-off frequen±

cies in the following order:

50—80—125

(Hz)

Only frequencies higher than those in the se±

lected range are output from the front or rear

speakers.

Note

If you switch the SFEO setting, the HPF function

is automatically turned off. By turning the HPF

function on after selecting the SFEO setting, you

can combine HPF function with SFEO

function.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra±

dical changes in volume when switching be±

tween sources.

• Settings are based on the volume level of

the FM tuner, which remains unchanged.

Compare the FM tuner volume level

with the level of the source you wish to ad±

just.

Press OPEN to open the front panel.

Press AUDIO to select SLA.

Press

AUDIO

until

SLA

appears in the display.

Press

to adjust the source vo±

lume.

Each press of

increases or decreases

the source volume.

SLA +4- SLA-4

is displayed as the source vo±

lume is increased or decreased.

Notes

Since the FM tuner volume is the control, it is

not possible to apply source level adjustments

to the FM tuner.

The AM tuner volume level can also be ad±

justed with source level adjustments.

The built-in CD player and the multi-CD player

are set to the same source level adjustment

volume automatically.

External unit 1 and external unit 2 are set to

the same source level adjustment volume

automatically

(M)