Pioneer DEH-X3800UI Owner's Manual - Page 11
SYSTEM settings
View all Pioneer DEH-X3800UI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English Menu Item Description EQ SETTING [SUPER BASS], [POWERFUL], [NATURAL], [VOCAL], [CUSTOM1], [CUSTOM2], [FLAT] Select an equalizer band and level for further customizing. Equalizer band: [80HZ], [250HZ], [800HZ], [2.5KHZ], [8KHZ] Equalizer level: [+6] to [-6] Select or customize the equalizer curve. [CUSTOM1] can be set separately for each source. However, each of the below combinations are set to the same setting automatically. • USB, iPod, PANDORA (iPhone), ANDROID, and APP (iPhone) [CUSTOM2] is a shared setting used for all sources. LOUDNESS [OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume. SUB.W*2 [NOR], [REV], [OFF] Select the subwoofer phase. SUB.W CTRL*2*3 Cut-off frequency: [50HZ], [63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ] Output level: [-24] to [+6] Slope level: [-12], [-24] BASS BOOST [0] to [+6] Only frequencies lower than those in the selected range are output from the subwoofer. Select the bass boost level. HPF SETTING Cut-off frequency: [OFF], [50HZ], [63HZ], [80HZ], [100HZ], [125HZ], [160HZ], [200HZ] Slope level: [-12], [-24] Only frequencies higher than the high-pass filter (HPF) cutoff are output from the speakers. SLA [+4] to [-4] Adjust the volume level for each source except FM. Each of the below combinations are set to the same setting automatically. • USB, iPod, PANDORA (iPhone), ANDROID, and APP (iPhone) *1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 5). *2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 5). *3 Not available when [OFF] is selected in [SUB.W]. SYSTEM settings You can also access to these menus when the unit is turned off. Menu Item Description CLOCK SET Set the clock (page 5). 12H/24H [12H], [24H] Select the time notation. INFO DISPLAY (Only for DEH-X3800UI/X3810UI) Display the item on the sub information display. Select from "SPEANA", "LEVEL METER", "SOURCE", "CLOCK", and "OFF". AUX [ON], [OFF] Set to [ON] when using an auxiliary device connected to the unit. USB AUTO [ON], [OFF] Select [ON] to automatically switch to [USB] source when a USB device/iPod is connected to the unit. Select [OFF] when a USB device/iPod is being connected to the unit just for charging. ANDROID WIRED [MEMORY], [APP CONTROL] Select the appropriate connection method for an Android device. P.APP AUTO ON [ON], [OFF] Select [ON] to automatically launch the car remote application when an Android device is connected to the unit via AOA. (Not available when [MEMORY] is selected in [ANDROID WIRED].) En 11