Pioneer DJM 600 Owner's Manual - Page 14

USING THE EFFECT/SAMPLER FUNCTIONS Measuring BPM Measurement and display of the BPM of channels selected with the auto BPM counter selector and of channels selected with the effect/sampler channel selector switch make it easy to mix music of different tempos. (Range of measurement: 70.0 to 180.0 BPM) Example: Displaying the BPM of music for auto BPM counter selector CH-1 and effect/sampler channel selector switch 2 (CH-2). Auto BPM counter selector MIC CH-1 CD1/LINE LINE PROFESSIONAL CH-2 CH-3 CD2/LINE PHONO 1 LINE PHONO 2 DJ MIXER DJM-600 CH-4 MASTER LINE SUB MIC /PHONO 3 MONO STEREO POWER MIC LEVEL - ∞ 0dB HI -12dB +12dB MID EQ -12dB +12dB LOW -12dB +12dB TRIM dB 14 10 7 -∞ +9dB 4 HI 2 1 0 -26dB -1 MID -2 +12dB -3 EQ -5 -7 -26dB +12dB -10 LOW -15 -24 -26dB +12dB TRIM dB 14 10 7 -∞ +9dB 4 HI 2 1 0 -26dB -1 MID -2 +12dB -3 EQ -5 -7 -26dB +12dB -10 LOW -15 -24 -26dB +12dB TRIM dB 14 10 7 -∞ +9dB 4 HI 2 1 0 -26dB -1 MID -2 +12dB -3 EQ -5 -7 -26dB +12dB -10 LOW -15 -24 -26dB +12dB TRIM dB 14 10 7 -∞ +9dB 4 HI 2 1 0 -26dB -1 MID -2 +12dB -3 EQ -5 -7 -26dB +12dB -10 LOW -15 -24 -26dB +12dB HEADPHONES CUE MASTER LEVEL dB 14 10 7 4 2 1 0 -1 -2 -3 -5 -7 -10 -15 -24 L R BEAT BEAT EFFECTS SAMPLER 1234 AUTO BPM COUNTER 70-139 BPM 91-180 BPM BPM MASTER 1 2 3 4 MIC PARAMETER1 % BPM mSec 1/2 3/4 1/1 2/1 4/1 1 2 4 8 16 BEAT TALK OVER CH-1 CH-2 CH-3 AUTO BPM COUNTER SELECTOR CH-4 MASTER EFFECTS/SAMPLER 10 HEADPHONES 9 8 MONO SPLIT STEREO 7 6 5 MIXING 4 3 2 1 0 CUE MASTER LEVEL 10 9 8 7 6 5 4 3 2 1 0 CH-1 - ∞ 0dB 23 OFF ON 1 4 THRU SAMPLER PHONES CROSS FADER ASSIGN A 10 10 10 10 9 9 9 9 8 8 8 8 7 7 7 7 6 6 6 6 5 5 5 5 4 4 4 4 3 3 3 3 2 2 2 2 1 1 1 1 0 0 0 0 CH-2 SAMPLER OFF ON FADER START 1 2 3 OFF ON 2 1 THRU CROSS FADER CURVE 3 4 SAMPLER CROSS FADER ASSIGN B MASTER BALANCE L R BOOTH MONITOR REVERB FRANGER PITCH FILTER SND/RTN TRANS EDIT PAN SINGLE ECHO LOOP DELAY STRETCH AUTO BPM 4 3 REC BEAT SAMPLER MIC CF. A 2 CF. B 1 MASTER CH. SELECT PARAMETER 1 TIME PARAMETER 2 LEVEL/ DEPTH MIN MAX A B - ∞ 0dB ON/OFF TAP BPM display Effect parameter/ BPM display Effect/sampler selector switch Effect/sampler channel selector switch Tap switch 1 Set the effect/sampler selector switch to AUTO BPM. 2 Press the BPM measurement range selector switch and select the BPM band for CH-1 and CH2. ÷ From the options of 70 to 139, 91 to 180, and 70 to 180, select the BPM band that matches the BPM of the music to be measured. When both LEDS are lit, 70 to 180 has been selected. 3 Set the effect/sampler channel selector switch to 2. ÷ LED "2" on the effect parameter/BPM display will light. ÷ The BPM of the music input to CH-2 will be displayed on the effect parameter/BPM display's counter. * LED will blink if BPM cannot be measured for more than 2 seconds. * Depending on the music, it might not be possible to measure BPM with the auto BPM counter. In this case, use manual mode to make settings (see page 15). 4 Press auto BPM counter selector CH-1. ÷ LED "1" on the BPM display will light. ÷ The BPM of the music input to CH-1 will be displayed on the BPM display's counter. * To measure BPM accurately, select only one channel (CH-1 to CH-4) for the auto BPM counter. BPM display 1234 AUTO BPM COUNTER 70-139 BPM 91-180 BPM BPM Effect parameter/ BPM display MASTER 1 2 3 4 MIC PARAMETER1 BPM LED Counter BPM measurement range selector switch LED Counter 1/2 3/4 1/1 2/1 4/1 1 2 4 8 16 BEAT ÷ Display when the BPM of CH-1 and CH-2 (126) match. 14