Pioneer DJM 600 Owner's Manual - Page 21
Using Sampler Playback Functions, Using Sampler Edit Function - record
UPC - 012562506258
View all Pioneer DJM 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
USING THE EFFECT/SAMPLER FUNCTIONS Using Sampler Playback Functions Following are the three available methods for playing back the sound recorded with the unit's built-in sampler. SINGLE PLAY LOOP PLAY STRETCH LOOP PLAY Plays only while the effect/sampler ON/OFF is being pressed. Repeatedly plays the recorded sound. Based on the BPM of the music to be mixed, repeatedly plays the sound recorded within the set number of beats (1, 2, 4, 8, or 16). The recorded sound will be played stretched to match the set number of beats. Example: Mixing stretch loop play of recorded music with music on CH-2 (BPM=130). 1 Set the effect/sampler selector switch to STRETCH LOOP PLAY. ÷ The effect/sampler ON/OFF switch will light green. 4 Set the effect/sampler ON/OFF switch to ON. ¶ When playback begins, the effect/sampler ON/OFF switch will blink green. 2 Set the effect/sampler channel selector switch to 2. ÷ LED "2" on the effect parameter/BPM display will light. ÷ The BPM of the music input to CH-2 will be displayed on the BPM display's counter. * The BPM band that matches the music on CH-2 can be selected with the BPM measurement range selector switch. * LED will blink if BPM cannot be measured for more than 2 seconds. In this case, use manual mode to make settings (see page 15). 3 Set the playback time and playback level. ÷ Press the effect beat selector switch and "8" will light on the beat display. * To set the playback time more precisely, use the effect/ sampler parameter 1 knob (TIME). The time that was set will be displayed on the effect parameter/BPM display. Playback time ranges from 10 to 16,000msec. * The playback level is set using the effect/sampler parameter 2 knob (LEVEL/DEPTH). BPM display 1234 AUTO BPM COUNTER 70-139 BPM 91-180 BPM BPM Effect parameter/ BPM display MASTER 1 2 3 4 MIC PARAMETER1 mSec 1/2 3/4 1/1 2/1 4/1 1 2 4 8 16 BEAT Counter BPM measurement range selector switch LED Counter Beat display Effect beat selector switch Using Sampler Edit Function Use the sampler housed inside the unit to set the position where playback of the recorded sound is completed. 1 Set the effect/sampler selector switch to EDIT. ÷ The effect sampler ON/OFF switch will light in green. 2 Set the effect/sampler ON/OFF switch to ON. ÷ When playback begins, the effect/sampler ON/OFF switch will blink green. 3 Set the playback stop position. ÷ While monitoring the loop playback sound, set the playback completion position (loop end point) with the effect/sampler parameter 1 knob (TIME). The time that was set will be displayed on the effect parameter/BPM display. * It is impossible to set it longer than the time that was recorded. 21