Pioneer DJM-700 Owner's Manual - Page 20
Effect Parameters
UPC - 012562860862
View all Pioneer DJM-700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
EFFECT FUNCTIONS EFFECT PARAMETERS Beat Effect (*1) Name 1 DELAY 2 ECHO (*2) 3 TRANS 4 FILTER 5 FLANGER Beat Switch Parameter Sets delay time of 1/8 to 16/1 per 1 beat of BPM time. Sets delay time of 1/8 to 16/1 per 1 beat of BPM time. Sets cut time of 1/16 to 16/1 per 1 beat of BPM time. Cycle of cutoff frequency shift is set in unit of 1/4 to 64/1 relative to 1 beat of BPM. Cycle of flanger shift is set in units of 1/4 to 64/1 relative to 1 beat of BPM. Parameter 1 (TIME dial) Contents Setting Range (unit) Sets delay time. 1 to 4 000 (ms) Sets delay time. 1 to 4 000 (ms) Sets effect time. 10 to 16 000 (ms) Sets cycle for cutoff 10 to 32 000 (ms) time shift. Sets cycle for 10 to 32 000 (ms) flanger effect shift. 6 PHASER Cycle of phaser effect shift is Sets cycle for phase 10 to 32 000 (ms) set in units of 1/4 to 64/1 effect shift. relative to 1 beat of BPM. 7 REVERB (*2) Amount of reverberation is set Sets amount of 1 to 100 (%) from 1 % to 100 %. reverberation effect. 8 ROBOT Sets pitch of robot sound Sets pitch of robot -100 to +100 (%) effect within range of -100 % sound effect. to +100 %. 9 CRUSH Cycle of crush effect movement is set to 1/4 to 64/1 relative to a single beat of BPM. Sets cycle for crush effect shift. 10 to 32 000 (ms) 10 ROLL (*2) Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. 1 to 4 000 (ms) 11 REVERSE ROLL (*2) Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. 1 to 4 000 (ms) 12 UP ROLL (*2) Effect time is set as 1/16 to 16/1 Sets effect time. relative of 1 beat of BPM. 1 to 4 000 (ms) 13 DOWN ROLL Effect time is set as 1/16 to 16/1 Sets effect time. (*2) relative of 1 beat of BPM. 1 to 4 000 (ms) 14 SEND/ - RETURN - - Parameter 2 (LEVEL/DEPTH dial) contents Sets balance between original and delay sound. Sets balance between original sound and echo sound. Sets balance between original sound and effect sound. Amount of effect increases when dial is turned clockwise. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Sets balance between original sound and effect sound. Amount of effect increases when dial is turned clockwise. Amount of effect increases when dial is turned clockwise. When dial is turned fully counterclockwise, only original sound is output. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets balance of original sound and roll sound. Sets volume of RETURN input sound. (*1) When the effect channel selector is set to [CF.A], [CF.B], or [MASTER], even if the effect monitor is turned ON, if the selected channel's sound is not output to the master output, the effect sound will not be heard. (*2) When effect is disabled (OFF), the effect sound will not be heard, even if monitor is set to effector. 20 En