Pioneer DJM-700 Owner's Manual - Page 7

CONNECTIONS CONNECTING EXTERNAL EFFECTORS, OUTPUT CONNECTORS Master output This unit is furnished with balanced output MASTER 1 (supporting XLR plugs), and unbalanced output MASTER 2 (supporting RCA plugs). Using the MASTER ATT switch, adjust the output level to match the input sensitivity of the power amplifier used. If the operating panel's MONO/STEREO switch is set to [MONO], the master output will be a monaural combination of L+R channels. Booth monitor output Unbalanced output supporting RCA-type plug. The sound volume for this output is controlled by the BOOTH MONITOR LEVEL dial, independently of the master output level setting. Recording output These are output connectors for recording, supporting RCA plugs. Digital output This is a coaxial digital output connector, supporting RCA plugs. The sampling frequency can be set to 96 kHz/24-bit format or 48 kHz/24-bit format to match the connected device. • Turn power off before changing this switch position. External effector Use a cable with Ø6.3 mm phone plugs to connect the DJ mixer's SEND connectors to the effector's input connectors. When using an effector with monaural inputs, connect only to the DJ mixer's L channel output. In this way, the mixed L+R audio signal will be sent to the effector. In the same way, use a cable with Ø6.3 mm phone plugs to connect the DJ mixer's RETURN connectors to the output connectors of the effector. If the effector has only monaural output, connect to the DJ mixer's L channel input only. The signal from the effector will be input to both L and R channels. When using an external effector, set the effect selector to [SND/ RTN]. Power amplifier (for booth monitor) Cassette deck (analog input recording device) Power amplifier (RCA plug input connectors) Digital input AV amplifier (digital input recording device) Sampling frequency selector switch POWER OFF ON BOOTH REC L 1 GND 2 HOT R 3 COLD R MASTER1 L CH-4 PHONO LINE L CH-3 PHONO LINE L CH-2 PHONO CD L CH-1 LINE CD L CONTROL CONTROL MIC 2 R MASTER2 MASTER RL ATT. -6dB -3dB 0dB R SIGNAL GND SEND R L(MONO) R R RETURN R L(MONO) DIGITAL OUT fs(Hz) 48k 96k MIDI OUT MASTER ATT switch Power amplifier (XLR plug input connectors) External effector 7 En