Pioneer DV-363-K Owner's Manual - Page 48
Initial Settings menu
View all Pioneer DV-363-K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
09 Initial Settings menu Chapter 9 Initial Settings menu Using the Initial Settings menu The Initial Settings menu gives you complete control in setting up your DVD player, including audio, and video output settings, audience limitation settings, among others. If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting. 1 Press HOME MENU and select 'Initial Settings' from the on-screen display. HOME MENU DVD Audio Settings Video Adjust Play Mode Disc Navigator Initial Settings Setup Navigator 2 Select the setup category from the list on the left, then select an item from the menu list to the right. 3 Make the setting you want. Digital Audio Out settings Digital Out You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs. • Default setting: On Initial Settings Digital Audio Out Digital Out On Video Output Dolby Digital Out Off Language DTS Out Display 96 kHz PCM Out Options MPEG Out If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On. Note that you can't switch on/off the optical and coaxial outputs individually. Dolby Digital Out You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs. • Default setting: Dolby Digital • The language options shown in the onscreen display illustrations on the following pages may not correspond to those available in your country or region. Initial Settings Digital Audio Out Video Output Language Display Options Digital Out Dolby Digital Out DTS Out 96 kHz PCM Out MPEG Out Dolby Digital Dolby Digital > PCM 48 En