Pioneer DV220KV-K Operating Instructions - Page 14

Changing the settings The factory default settings are indicated in italic. Parameters (settings) Audio Settings parameters Hue Adjusts the balance between green and (green 9 to red 9) red. Parameters (settings) Sound Retriever (High/Low/Off)  The sound of a WMA or MP3 file is played with high sound quality. This is only valid for files with the extension ".wma" or ".mp3".  The effect depends on the file. Try different settings, and choose the one providing the good effect. Equalizer (Off/ Rock/ Pop/ Live/ Dance/ Techno/ Classic/ Soft) Select according to the genre of music to be listened to. Virtual Surround (On/ Off)  A surround sound field with a sense of presence can be created with two speakers.  When set to On, linear PCM audio signals of 96 kHz or greater are converted to 48 kHz. Audio DRC (High/ Medium/ Low/Off)  This makes loud sounds weaker and weak sounds louder. Change the setting for example when watching movies late at night.  This setting only affects Dolby Digital sound.  The effect depends on the volume of the connected TV, AV receiver or amplifier, speakers, etc. Try different settings, and choose the one providing the strongest effect. Dialog (High/Medium/ Low/Off) Change this setting if the sound of dialogs is low and the dialogs are hard to hear. Chroma Level (-9 to +9) Adjusts the density of the colors. This setting is effective for sources with many colors, such as cartoons. Brightness, Contrast, Gamma, Hue and Chroma Level are set to 0 upon purchase. Initial Settings parameters  The player's detailed settings can be changed here.  Initial Settings cannot be selected during playback. Stop the disc first. DV-220KV-K Initial Settings Digital Audio Out Video Output Language Display Options HDMI Out Digital Out Dolby Digital Out DTS Out 96kHz PCM Out MPEG Out  Auto  On  Dolby Digital  DTS  96kHz > 48kHz  MPEG > PCM Digital Audio Out settings Options settings Settings HDMI Out (DV-220KV-K only) Select the audio signals to be output from the HDMI OUT terminal (LPCM (2CH)/ Auto/Off) according to the connected HDMI-compatible device. Digital Out Select whether to output digital audio signals (On) from the COAXIAL DIGITAL AUDIO OUT terminals or not (Off). About Sound Retriever function  When audio data is removed during the compression process, sound quality often degrades. The Sound Retriever function automatically enhances compressed audio and restores CD quality sound. Video Adjust parameters Dolby Digital Out DTS Out Select whether to output Dolby Digital audio signals (Dolby Digital) or to convert Dolby Digital audio signals into linear PCM signals (Dolby Digital > PCM) for output, according to the connected AV amplifier, etc. Select whether to output DTS audio signals (DTS) or not (Off), according to the connected AV amplifier, etc. Parameters (settings) Sharpness (Fine/Standard/ Soft) Adjusts the picture's sharpness. Brightness (-20 to +20) Adjusts the picture's brightness. Contrast (-16 to +16) Adjusts the ratio of the brightness of the brightest and darkest portions of the picture. 96 kHz PCM Out MPEG Out Select whether to output 96 kHz audio signals (96kHz) or to convert 96 kHz audio signals into linear PCM signals (96kHz > 48kHz) for output, according to the connected AV amplifier, etc. Select whether to output MPEG audio signals (MPEG) or to convert MPEG audio signals into linear PCM signals (MPEG > PCM) for output, according to the connected AV amplifier, etc. Gamma (-3 to +3) Adjusts the look of the dark portions of the picture. 14 En