Pioneer GM-6500F Owner's Manual - Page 13
Specifications, Additional information - weight
View all Pioneer GM-6500F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Additional information Appendix English Specifications Power source 14.4 V DC (10.8 V to 15.1 V allowable) Grounding system Negative type Current consumption 32 A (at continuous power, 4 W) Average current drawn ......... 9 A (4 W for four channels) 15 A (4 W for two channels) Fuse 25 A × 2 Dimensions (W × H × D) ... 289 mm × 62 mm × 349 mm (11-3/8 in. ×2-1/2 in. × 1 ft. 2 in.) Weight 3.3 kg (7.3 lbs) (Leads for wiring not included) Maximum power output ....... 760 W (190 W × 4) Continuous power output ... 60 W × 4 (at 14.4 V, 4 W, 20 Hz to 20 kHz ≦ 1 % THD +N) 180 W × 2 (at 14.4 V, 4 W BRIDGE 1 kHz, ≦ 1 % THD +N) 85 W × 4 (at 14.4 V, 2 W, 1 kHz, ≦ 1 % THD+N) Load impedance 4 W (2 W to 8 W allowable) Frequency response 10 Hz to 70 kHz (+0 dB, - 3 dB) Signal-to-noise ratio 98 dB (IHF-A network) Distortion 0.05 % (10 W, 1 kHz) Low pass filter: (A ch) Cut off frequency 80 Hz Cut off slope 12 dB/oct (B ch) Cut off frequency 40 Hz to 500 Hz Cut off slope 12 dB/oct High pass filter: (A ch) Cut off frequency 80 Hz Cut off slope 12 dB/oct (B ch) Cut off frequency 40 Hz to 500 Hz Cut off slope 12 dB/oct Gain control: RCA 200 mV to 6.5 V Speaker 0.8 V to 26 V Maximum input level / impedance: RCA 6.5 V / 22 kW Speaker 26 V / 22 kW CEA2006 Specifications Power output 60 W RMS × 4 Channels (at 14.4 V, 4 W and ≦ 1 % THD +N) S/N ratio 80 dBA (reference: 1 W into 4 W) Notes ! Specifications and the design are subject to modifications without notice. ! The average current drawn is nearly the maxi- mum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. En 13