Pioneer GM-6500F Owner's Manual - Page 9

Connecting the units Section 03 English Four-channel / Three-channel output ! Slide INPUT SELECT (input select) switch to 4CH position. 12 3 4 1 RCA input jack A 2 RCA input jack B 3 Connecting wires with RCA plugs (sold sepa- rately) 4 From car stereo (RCA output) If only one input plug is used, e.g. when the car stereo has only one output (RCA output), connect the plug to RCA input jack A rather than B. Two-channel output (Stereo) / (Mono) ! Slide INPUT SELECT (input select) switch to 2CH position. 1 2 Connecting wire with RCA pin plugs (sold separately) 3 From car stereo (RCA output) Connections when using the speaker input wire Connect the car stereo speaker output wires to the amplifier using the supplied speaker input wire. ! Do not connect both the RCA input and the speaker input at the same time. 1 Car Stereo 2 Speaker output 3 White/black: CH A, Left * 4 White: CH A, Left + 5 Gray/black: CH A, Right * 6 Gray: CH A, Right + 7 Green/black: CH B, Left * 8 Green: CH B, Left + 9 Violet/black: CH B, Right * a Violet: CH B, Right + b Speaker input connector To speaker input terminal of this unit. 2 3 1 RCA input jack A For two-channel output, connect the RCA plugs to the RCA input jack A. Connecting the power terminal The use of a special red battery and ground wire RD-223, available separately, is recommended. Connect the battery wire directly to the car battery positive terminal + and the ground wire to the car body. En 9