Pioneer GM-D9500F Owner's Manual - Page 10
Connections when using, the RCA input jack, the speaker input wire, Connecting the units - car amplifier
UPC - 012562967608
View all Pioneer GM-D9500F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Section 03 Connecting the units Connections when using the RCA input jack Connect the car stereo RCA output jack and the RCA input jack of the amplifier. ! The RCA output jack of this unit outputs the signal that comes from The RCA input jack A. Four-channel / Three-channel output ! Slide INPUT SELECT (input select) switch to 4CH position. 1 RCA input jack A For two-channel output, connect the RCA plugs to the RCA input jack A. 2 Connecting wire with RCA pin plugs (sold separately) 3 From car stereo (RCA output) 1 RCA input jack A 2 RCA input jack B 3 Connecting wires with RCA plugs (sold sepa- rately) 4 From car stereo (RCA output) If only one input plug is used, e.g. when the car stereo has only one output (RCA output), connect the plug to RCA input jack A rather than B. Two-channel output (Stereo) / (Mono) ! Slide INPUT SELECT (input select) switch to 2CH position. Connections when using the speaker input wire Connect the car stereo speaker output wires to the amplifier using the supplied speaker input wire with RCA pin cord. 1 Car Stereo 2 Speaker output 3 Red: Right + 4 Black: Right * 5 Black: Left * 6 White: Left + 7 Speaker input wire with RCA pin cord To the RCA input jack of this unit 10 En